Concrobium Mold Control provides long-term protection as long as the treated area remains dry and free of excess moisture.
Yes, Concrobium Mold Control effectively eliminates all types of household mold, including the toxic strains often referred to as "black mold".
This step typically involves using a specialized solution that kills the type of mold you're dealing with, and any remaining spores to prevent future growth. Depending on the extent of the contamination, it can take anywhere from a few hours to a few days to treat the mold.
I spray it on, wait 30 seconds or so, brush it, then wipe it off with a towel. All stains are gone! Mist the canvas and let it dry for extra protection.
Repeat application weekly or when growth or odor reappears. Prior to reapplication determine the cause of re-growth and correct that problem prior to re-application. Reapplication of Concrobium Mold Control may be required if surfaces are washed or painted or are otherwise directly exposed to water.
Mold is generally at its worst from early spring through early fall (specifically July through October), peaking during the warmest and most humid months. Mold thrives in warm temperatures (60∘F to 80∘F) combined with relative humidity levels above 60%.
To kill mold permanently, you must combine targeted remediation with moisture control. No product works permanently if the source of moisture remains. The most effective approach includes using specific biocides, removing infested porous materials, and managing your home's humidity.
To permanently kill black mold, you must eliminate the mold roots in porous materials and fix the underlying moisture source. No chemical kills roots inside porous drywall or wood; heavily infested materials must be removed. Otherwise, use a 3% hydrogen peroxide solution or distilled white vinegar.
Concrobium Mold Control is an odorless, EPA-registered solution made from natural salt compounds that crushes mold spores as it dries and leaves an antimicrobial shield to prevent regrowth.
Research has shown that English Ivy can eliminate up to 78% of airborne mold within 12 hours. This makes it particularly useful in humid areas like bathrooms and basements where mold growth is more common.
No, black mold will not die on its own. When deprived of moisture, it merely goes dormant. It stops growing, but the dried-out spores remain active and can reactivate within 24 to 48 hours as soon as new moisture is introduced.
Handling – No special controls, ventilation, or personal protective equipment is required while handling the product. To avoid applicator exposure to mold or mold spores during use, consult product label section: “PERSONAL PROTECTION EQUIPMENT REQUIREMENTS FOR APPLICATORS”.
Mold toxicity (or mycotoxin illness) occurs when you are exposed to mold spores that produce toxic byproducts. These symptoms can mimic other conditions and often range from mild respiratory irritation to severe neurological and immune responses.
Yes, Concrobium Mold Control is generally considered better than bleach for treating mold because it kills mold at the roots and prevents regrowth, whereas bleach often only bleaches surface stains on porous materials and can worsen issues. Concrobium dries to form an antimicrobial shield, is non-toxic, and works on both porous and non-porous surfaces.
For the strongest, professional-grade mold stain removal, contractor-strength formulas using sodium hypochlorite (bleach) are generally the most effective. For total root destruction on porous materials without bleach, specialized biocides and botanical solutions offer long-term remediation.
Mold stains do not always mean the mold is still active; they are often just cosmetic residue left behind after the mold has died or been successfully removed. However, distinguishing between a harmless stain and active, living mold requires checking for a few key signs:
Bleach. If you don't have a specific mould spray, bleach can be used instead. Mix a solution of one part bleach and four parts water. Take a cloth and wipe this solution across the wall, scrubbing gently until all the mould has been removed.
In A Nutshell: Misconceptions About Mold
Your home can be 100% mold-free: No, there are always mold spores in the air. Anyone can effectively remove mold: No, you need professional services for that.
Black mold spores can remain airborne indefinitely. Due to their microscopic size (222–100100100 microns), they float continuously in air currents, settling only when they land on a damp surface or when air becomes completely stagnant. They can linger in indoor air for several hours to days after a disturbance, such as cleaning, if not properly remediated.
Stop black mold from spreading by immediately isolating the affected area with plastic sheeting, repairing the moisture source, and reducing indoor humidity to below 50%. Use protective gear (N95 mask, goggles, gloves) and clean hard surfaces with soap, water, or vinegar, while discarding porous materials like carpets or drywall that are heavily infested.
Toxic black mold (Stachybotrys chartarum) is dark green or black. It is a highly dangerous form of mold known to produce mycotoxins as airborne mold spores. The mold spores are easily circulated and affect indoor air quality. When they're unknowingly inhaled, they're dangerous to human health.
The "strongest" mold killers fall into two categories: professional-grade chemical solutions that instantly destroy mold and bleach stains, and deep-penetrating EPA-registered disinfectants that kill roots and spores without harsh fumes.
Never mix chlorine bleach solution with other cleaning solutions or detergents that contain ammonia because toxic fumes could be produced. Please note: Dead mold may still cause allergic reactions in some people, so it is not enough to simply kill the mold, it must also be removed.
Also adept at reducing benzene and formaldehyde levels. English Ivy: A Christmastime favorite that's a year-round keeper because it filters 78 percent of airborne mold in 12 hours.
Vinegar typically performs best on mold when it is used undiluted in full strength. Simply transfer the white vinegar into a spray bottle. Spray the vinegar directly onto the mold.