Use your instincts; if it looks like one cup is going to cause too much fizz, use less or pour more slowly. Allow the fizz to sit for at least 20 minutes. See if it worked. Once the clog is broken up, the water level should go down.
Baking soda and vinegar is a marvelous cleaning agent, and when dumped into a clogged toilet, often will break up the clog without you having to do a thing. This is what you want to do: combine two cups hot water with two cups white vinegar.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Pour one cup of baking soda into the bowl. Slowly pour one cup of vinegar into the bowl. If you pour too quickly, the reaction could make a mess on your bathroom floor.
Allow the baking soda and vinegar combination to sit for at least 20 minutes. You might hear your toilet flush when the clog gets removed before the end of that time. If that happens, run the handle to refill the bowl and flush it for a second cycle.
Hot Water and Dish Soap
Heat up a gallon of hot water on the stove and pour some dish soap into your toilet while the water is heating up. When the water is extremely hot, but not boiling, pour into the toilet carefully. Wait for 10-15 minutes while the dish soap and hot water soften the clog.
Let It Sit For 12 Hours
Leave the vinegar and water mixture in the toilet tank for 12 hours without flushing the toilet. This is why this cleaning process is best done overnight, as you are less likely to need the bathroom throughout the night than during the day.
Spray some white vinegar inside the toilet bowl and let it sit for a few minutes. I usually let it work for at least 10 minutes. You can also let it sit for several hours or even overnight. You can even just pour the vinegar into the toilet bowl's water and let it sit.
Use Baking Soda and Vinegar
Measure one cup of baking soda and pour it into the toilet. Then, pour two cups of white vinegar onto the baking soda to create a chemical reaction that fizzes. As it fizzes and circulates in the bowl, you may see the water level drop which indicates that the blockage is clearing.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.
But common pantry essentials that are often used for cleaning — like baking soda and vinegar — shouldn't be mixed either. Unlike the bleach-ammonia mixture, combining soda and vinegar won't hurt anyone — but don't expect the mixture to do a good job cleaning, either.
Can you leave baking soda in the drain overnight? It is safe to leave baking soda (and vinegar) to work overnight to unclog a drain.
To that end, when it comes to using baking soda for your toilet, there are two primary purposes: using baking soda to clean and remove stains, and using baking soda to unclog your toilet.
Use Vinegar, Baking Soda, and Hot Water
Just like with clogged kitchen sinks, these three products can work wonders when dealing with clogged toilets. All you need to do is pour a cup of baking soda, 4 cups of boiling water, and a cup of vinegar into the toilet.
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
To remove tough stains, add the baking soda and vinegar mix to your toilet and then allow the solution to sit in the bowl for up to 30 minutes. During that time, the chemical reaction between the sodium bicarbonate and vinegar will work to eat away at those stubborn hard water stains.
To remove hard water stains, one cup of vinegar and one cup of baking soda will do wonders, but when it comes to unclogging the toilet, it takes a bit more work. Using heat and pressure changes can unclog a toilet, so pour around one cup of baking soda into the toilet bowl followed by a gallon of very hot water.
As it turns out, you can actually unclog a toilet with dish soap instead of turning to a harsh, toxic bowl cleaner. Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
Using a plunger is one of the most effective methods used for unblocking a toilet as it can unclog a wide variety of waste pipes.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)