If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
After your pavers have been sealed, it's a good idea to let the sealer fully cure before walking/driving over it. If your sealer was in a driveway it's best not to drive over it for at least 48 hours. You'll know the pavers are ready for activity when the sealer is no longer sticky or tacky.
If you experience any dew, accidental sprinkling of water or rain as the sealant dries, the sealant can become stained, cloudy, blotchy, or discolored and it will no longer be aesthetically pleasing. Simply don't seal your paver if there is even a remote chance of rain, fog, or a drizzle.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered. Pavers will have an adequate amount of protection for when it's time to seal again. Make sure to keep leaves and other debris off the pavers while they are drying to avoid blemishes.
You pressure clean the pavers, re-sand the paver joints and then apply two coats of your favorite paver sealer and the job was complete.
Curing Time
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
What are the ideal weather conditions for sealing? Ideal conditions would be 75 degrees and sunny; however, anywhere between 50-90 degrees is generally fine. Take note that solvent-based sealants evaporate faster, so lower temperatures are better for application.
Should Pavers Be Dry Before The Sealing Proccess? Yes, it is important to ensure that your pavers and your pool deck are dry before applying sealer. If they are wet, the sealer will not be able to adhere properly and could eventually peel off and cause damage to the pavers.
If a white haze appears on sealed pavers, it is less likely that the white spots are efflorescence but rather, water condensation collecting underneath the sealer. Removal is still possible, but a chemical solution is required. If your sealer is oil-based, the fix is to re-emulsify the sealer with Xylene.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
Choosing to seal your pavers will keep your color consistent and un-faded. Not only does choosing to seal your pavers keep the color untouched, but it can also increase the vibrancy of your colors. One largely agreed upon benefit of sealers is that they limit stains.
Yes. Sealing your pavers is the most beneficial thing you can do to ensure they last longer, ward off stains and maintain their beauty. If you choose not to seal your pavers they may suffer the effects of erosion, weed growth, mold or mildew build up, discoloration, and can become loose.
Don't get me wrong; your brick pavers need to be sealed! However, you want to wait a minimum of 30 days after installation (in Florida) before you have them sealed.
Allow for curing time. You need 48 hours of dry weather after your sealer has been applied to cure it. (Remember to turn off your automatic water sprinklers.) If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer.
That's because the product won't dry as well. At Earth, Turf, & Wood, we actually prefer that it is at least 60 degrees, even in the evening hours. That makes mid-summer the best time for sealing pavers, though we may perform these services as early as May and as late as September, depending on weather conditions.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
There are three ways to darken your pavers: sealing, staining, and painting, with the first being the less invasive option. The first thing you need to do before starting any process of darkening pavers is to clean them.
If your pavers have been sealed, which is a service that we offer, it's a lot easier to maintain and it does slow down mold growth for the simple fact that when your pavers are unsealed, that moisture will sit in the joints and make mold grow. Mold likes damp, dark areas.
While a thorough cleaning, sanding, and sealing process can significantly hinder weed growth and prevent them from taking over your paver system, it is important to understand that sealing alone cannot completely eradicate weeds.
One of the best paver sealers is the Siloxa-Tek 8500. It is a penetrating concrete sealer designed to treat a variety of applications with an emphasis on hydrophobicity and reduction of water uptake. It dries completely clear with a natural finish that will not change the look or appearance of the susbtrate.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.