The first thing you should do when considering replacing your toilet is to look at the age. Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used.
On average, most toilets will have a lifespan of between 10 and 15 years, even with regular use. The lifespan may vary depending on the toilet model and the wear and tear it experiences over the years. Most toilets will start to give you warning signs indicating the time for replacement is near.
How often should you replace your toilet? Toilets are hardy devices that can last for up to 50 years if they're well-maintained and gently used. However, with daily use, you can expect a toilet to last about 20 to 30 years before it needs to be replaced.
Toilet parts should last a minimum of 5 years. Depending on water quality and type & brand of toilet, sometimes they last longer than that, sometimes less than that. You might get 10 or 15 years without having to touch a toilet or fool with any repairs.
A general rule of thumb is to replace a toilet around every 25 years, though your mileage may vary. You might also want to consider replacing your toilet if it was installed before 1994.
There are important reasons you should flush after using the restroom, such as being able to avoid bathroom germs that could make you sick. Although some individuals may flush the toilet out of habit—or at least use one that automatically flushes—not everyone does it.
One-piece toilets: Can cost as low as $100 and as much as $5,000 for some models. Most cost between $250 and $600 with the average cost around $500. Two-piece toilets: Can cost as low as $100 with the most expensive toilets costing around $3,000. Most average around $100 to $300.
What is the average cost for a new toilet? The cost of a new toilet varies widely depending on the brand and features, but typically averages $200 to $500. Professional installation will increase the total cost to around $400 to $800.
Many tend to associate lower flow with lower flushing power. Not true. New technology and design advancements, such as pressure-assisted flushers and modifications to bowl contours allow high-efficiency toilets to flush better than first-generation low-flow toilets.
The average toilet lasts between 15 to 30 years, depending on how often it is used and how well it is maintained. If you bought a high-quality toilet and maintained it diligently, your toilet could last 50 years.
Your toilet is dependent upon good flow from the tank to the bowl to create a quality flush. Obstacles such as hard water buildup in your bowl can lead to further buildup to the ports that take the water from the tank to the bowl. These restricted ports, in return, create a restricted flush.
You may need to have your toilet serviced or replaced so it will work more efficiently and use less water. Is your toilet at least 25 years old? Then it's time to replace it with one that can conserve water and save money on your water bill. Federal guidelines require toilets to use no more than 1.6 gallons per flush.
While installing a new toilet can definitely be the best option for a troublesome fixture, it is not necessarily the only solution. When a few repairs will be enough to solve the problem, there is no reason to spend the extra money to buy a new toilet and take the time to install it.
“Most homeowners can replace their toilet if they have the proper materials, tools, and background knowledge,” he admits. “They also need to be able to lift it too.” Here's everything you need to know about how to install a toilet, and how to get the job done in eight steps.
Barring there are no other issues, to remove and replace a toilet should take a professional plumber about 30 minutes.
Toilet Installation and Replacement
If you're replacing, our installers can remove your old toilet for you starting at $25, depending on municipal waste disposal requirements.
How much will a plumber charge to install a toilet? Toilet installation costs range from $224 to $532, with the national average at $372. Plumbers can charge anywhere from $65 to $350 per hour for labor costs.
Share: Toilets can last for up to 50 years under average conditions. However, this doesn't mean that you won't need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
One- or Two-Piece Toilets
Although plumbers don't have a preference in terms of installation, one-piece models are easier to install in smaller bathrooms. One-piece models are easier to clean as they are lower and have fewer cubbyholes. Two-piece models are often less expensive than one-piece models.
Better for ease of cleaning : One-piece toilets have a seamless design with no crevices or seams between the bowl and the tank, making them easier to clean and sanitize. Better for overall sleek design: One-piece toilets often have a more modern and sleek design, which can add a contemporary feel to a bathroom.
To remedy this problem, use a plunger or toilet augur. If using a plunger, make sure it's a flange-style so that it seals well with the bowl. Use the plunger a few times to loosen any materials potentially clogging the sewer lines, then flush the toilet to see if it's working better.
If you have a toilet that doesn't fully flush, common causes include a clog in the trap, a worn-out flapper, blocked rim jets, a faulty float, or an issue with the handle and chain.
There is no “normal” number of bowel movements. Many healthcare providers agree that healthy bowel movement frequency can range from three times a day to three times a week. However, your 'normal' pattern may be different from these numbers.