How do you get wet out of a mattress?

Author: Miss Pauline Feeney III  |  Last update: Saturday, August 2, 2025

Baking Soda for Absorption Sprinkle Generously: After blotting, sprinkle a generous amount of baking soda over the wet areas. Let It Sit: Leave the baking soda on the mattress for at least a few hours, ideally overnight. Vacuum It Up: Vacuum the baking soda thoroughly once it has absorbed the moisture.

Is a mattress ruined if it gets wet?

If a mattress gets wet, it may not necessarily be ruined, but it can be difficult to restore it to its original condition. Water can cause mold and bacteria growth, which can lead to unpleasant odors and potential health risks.

What is the fastest way to dry a wet mattress?

How to dry a mattress quickly after spilling water Use a towel and an iron. Cut down the drying process by 12 hours. Flip the towel every 30 seconds. Turn fan on to dry faster. Use a small amount of arm and hammer with oxy in hot water. Wrap a hot lid in microfiber cloth. Stains should disappear.

How to get moisture out of a mattress?

Sprinkle baking soda over damp spots to absorb moisture. Keep mattress elevated for airflow. Use fans and dehumidifiers to accelerate drying. Avoid heat sources like hairdryers or sunlight to prevent damage.

What to do if I spill water on my mattress?

The steps are simple:
  1. Sprinkle the mattress with baking soda to help absorb some moisture.
  2. Vacuum the mattress with a wet/dry vacuum.
  3. Make sure to let the mattress dry fully before using it again.

How to Dry a Mattress

What absorbs water from mattress?

To absorb moisture from a very wet mattress, start by blotting the surface with clean towels to soak up as much water as possible. Then, sprinkle baking soda over the damp area to help absorb moisture and neutralize odors. Allow the mattress to sit for several hours before vacuuming it.

How do you clean a mattress after wetting it?

You can skip the fancy cleaning products and find what you need right in your kitchen: white vinegar and warm water. Mix it up 50/50 and use a spray bottle to apply it to your mattress. Then blot the mattress again with a towel. You might have to repeat this process for a bigger (or smellier!)

How long should a mattress take to dry?

How long does it take to dry a mattress? It typically takes 24-48 hours for a mattress to fully dry after cleaning, depending on factors like material and degree of moisture. Proper drying is crucial to prevent mold and mildew growth.

Can you save a water damaged mattress?

Therefore, you should only attempt to dry a wet mattress if the water is from a clean water source and has not sat longer than 48 hours. Even if the source is clean water from a broken pipe, you should dispose of a wet mattress that is completely saturated with water.

How do you fix a soggy mattress?

Here are a few strategies that you can try:
  1. Use a Mattress Topper. Purchasing a mattress topper can help you sleep more comfortably on a mattress that is sagging. ...
  2. Rotate the Mattress. ...
  3. Replace the Foundation. ...
  4. Use Extra Pillows. ...
  5. Explore Warranty Coverage.

Can wetting the bed cause mold?

The Hidden Dangers of Pee on a Mattress

Urine contains bacteria, and when left long enough, mold can develop. It also contains urea, uric acid, and other dangerous compounds. The smell of ammonia that is trapped in your bed is caused by bacteria eating away at the urine residue.

How do you dry pee out of a mattress fast?

  1. Strip the bed. As quick as possible, get your wet bedding into the washing machine. ...
  2. Blot the wet mattress with a dry towel. Spread the dry towel over the wet area of the mattress. ...
  3. Spray the pee-soaked area with a white vinegar solution. ...
  4. Sprinkle the urine with baking soda. ...
  5. Vacuum the soiled baking soda.

How long does a wet spot take to dry?

Generally, it takes about 72 hours to dry an undamaged room completely. But this doesn't cover big areas or when the damage is severe. Cleaning & Restoration Specialist stresses that drying well and cleaning are key. This stops mold and kills bacteria.

How do you dry a fully soaked mattress?

After cleaning, you can sprinkle a layer of baking soda on the wet mattress surface and allow it to soak up the excess moisture. Then vacuum the baking soda off the mattress to dry it. You can also put the mattress under a fan indoors or out in the sun to allow it to dry completely.

How to dispose of a wet mattress?

5 ways to dispose of your old mattress
  1. Donate or sell your mattress.
  2. Retailer take-back.
  3. Take it to a recycling centre.
  4. Council bulky waste collection.
  5. Man & van mattress removal. Example mattress removal prices.

What is the best waterproof mattress cover?

The 4 Best Waterproof Mattress Protectors of 2025, as Tested by Our Experts
  • Saatva Waterproof Mattress Protector. Best overall waterproof mattress protector. ...
  • Sleep Number Total Protection Mattress Pad. Best cooling waterproof mattress protector. ...
  • Coop Home Goods Waterproof Mattress Cover. ...
  • Happsy Organic Mattress Pad.

What should I do if I spill water on my mattress?

As soon as you notice the water damage on your mattress, start drying it with towels. Get as much of the water sitting on top as possible before it can soak down into the mattress's core. The sooner you can get the mattress dry, the better.

How to know if a mattress has mold?

Signs of mold on a mattress include visible mold spots or patches, a musty odor, increased allergy symptoms, and any recent moisture exposure that could foster mold growth. It's important to identify and address mold early to protect your health.

Can you use a wet vac on a mattress?

Make sure you use a wet/dry vacuum and not your regular vacuum. Repeat the cleaning steps above to remove any urine stains or odor that remain. Use a clean towel to dry the area, and allow the mattress to fully air dry (outside in the sun, if possible) before applying sheets.

What to do with a mattress when you wet the bed?

How to get pee out of a mattress
  1. Find another bed. ...
  2. Blot the excess. ...
  3. Sprinkle baking powder onto the stain to soak up the remaining moisture.
  4. Mix a cleaning solution. ...
  5. Leave the solution to work. ...
  6. Blot up the liquid again. ...
  7. Sprinkle more baking soda over the whole surface of the mattress. ...
  8. Vacuum it up.

Does putting baking soda on your mattress clean it?

Baking soda offers an effective, natural, and economical way to sanitize and deodorize your mattress without the use of harsh chemicals.

How long does it take for a wet mattress to mold?

Mold can start growing on a damp mattress within 24 to 48 hours.

What to do if you wet your bed?

  1. Step 1: Strip the bed. First, you'll want to remove your sheets, comforter, and fitted sheet from the bed. ...
  2. Step 2: Create a cleaning agent with pantry items. Making a cleaning solution is easier than you might expect. ...
  3. Step 3: Use a damp towel to blot. ...
  4. Apply baking soda. ...
  5. Vacuum. ...
  6. Get an absorbent pee pad.

What is the best way to remove water stains from a mattress?

Rubbing alcohol, hydrogen peroxide, vinegar, laundry detergent, citrus-based household cleaners, and dish soap are all good mattress stain removers. The best solution? 3/4 cup warm water, 1/4 cup vinegar, and a tablespoon of liquid dish soap in a spray bottle.

What is the best way to clean and freshen up a mattress?

To keep your mattress smelling fresher for longer you could mix a small amount of baking soda, water and essential oils in a spray bottle and lightly spray the mattress. You could use chamomile or lavender essential oils for a relaxing scent to help soothe you to sleep.

Previous article
How to protect a white sink from scratches?
Next article
What happens if you leave the heater on?