Most farmhouse sinks stick out past the face of the cabinets from . 75 of an inch to as many as 2 inches. Take a look at nearby drawers prior to ordering your sink to ensure that you will have clearance when the drawer is extended.
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.
Types of Farmhouse Sink Installation
A farmhouse sink installation can be done in 3 ways: Flush mount Installation: Where the sink sits in level to the countertop. Built-up Installation: Where the sink sits above the level of the countertop. Undermount Installation: Where the sink sits just below the countertop.
OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.
For an 'undermount' sink, the top of the sink needs to sit ⅛” under the countertop. To determine how tall your framing needs to be, measure the inside height of the cabinet, minus the height of the sink, minus ⅛”. Lastly, make sure the 2×4 frame is a tight fit behind the cabinets.
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
However, there are some key differences between the two types of sinks. Apron sinks are generally smaller than farmhouse sinks. They are available in various materials, including stainless steel, copper, and porcelain. Apron sinks are available in different styles, including single-bowl and double-bowl options.
Keep in mind that farmhouse sinks have a deep front apron that hangs over the edge of the cabinetry. The full height of the apron is usually around 10”.
The primary benefit of a grid for new farmhouse sinks is to protect the brand new finish. Fresh copper and even hardened fireclay scratch more easily than you might realize. The metal bottom of pots, the metal tines of forks, and even the scrape of ceramic plate edges might cause a small flaw in the finish.
With an apron sink, you can keep much of this mess at bay. If any water, suds, or spills make their way over the front lip, they'll avoid your counter and cabinets, landing on the floor instead. This is because the sink itself sticks out beyond the depth of your cabinets.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
2. Farmhouse sinks (+26 percent) Porcelain, apron-front sinks are a splurge kitchen choice for sure—but apparently they pay you back big-time in the long run.
Kohler makes farmhouse sinks with smaller aprons to keep the same aesthetic in a more manageable size for some cabinets. In most new homes the kitchen sink is approximately 30 inches in length, which is a standard size for a farmhouse sink. The other standard sizes are 24, 33, and 36 inches.
Once the farmhouse under-mount sink is set, it's time to install the countertops above. For this step, professional help is recommended; you'll need to have precise measurements of the sink's dimensions, as the countertop might need to be adjusted and cut to fit in perfectly.
Most sink manufacturers provide a template. Position the template so it is centered on the sink cabinet and is at least 1 1/2 inches back from the countertop's front edge. If your countertop is deeper than 24 inches, place it farther back, but not more than 4 inches.
Bathroom Sink Distance From the Wall
Place bathroom sinks 20 inches from the back wall, recommended. The bare minimum is 15 inches. This is measured from the sink's center point to the wall.
Apron sinks are deep cut, like farmhouse sinks. The only difference is, an apron sink's front is exposed. That's why they're also called "apron front" sinks. Modern kitchens use apron sinks as highlight pieces, and for good reason.
Are farmhouse sinks out of style? Farmhouse sinks are most definitely not out of style. In fact, House Beautiful has featured plenty examples of this timeless design element over the years, as seen in articles about the modern farmhouse aesthetic, modern farmhouse kitchens, and modern farmhouse decor.
Even so, having said all that, there are plenty of reasons farmhouse sinks will never go out of style. As George pointed out, “they are extremely versatile” and as long as you're careful and “you keep on top of cleaning, your sink will remain in good quality for years to come.”
One of the drawbacks of choosing a farmhouse sink is the installation process. Depending on how your kitchen is set up, you may have to alter the size and design of your countertops before the farmhouse sink installation. Farmhouse sinks are much deeper and wider than classic kitchen sinks.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Most farmhouse sinks stick out past the face of the cabinets from . 75 of an inch to as many as 2 inches. Take a look at nearby drawers prior to ordering your sink to ensure that you will have clearance when the drawer is extended.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
Easily Wash Large Pots and Pans
Sometimes you find yourself with large sheet pans, stock pots and multiple pots and pans that need to soak and be scrubbed. Having two smaller basins makes this task a bit tricky as you have to tip and rotate them. A single large basin sink makes this task so much easier!
The two top contenders are either a enamel-coated cast iron or a fireclay apron sink. Both are very strong materials, and both have been used for hundreds of years to make not only sinks but also structural building materials and tools for extreme temperatures.