How does comb picking work?

Author: Sierra Fahey DVM  |  Last update: Sunday, June 5, 2022

Comb picks work by pushing the entire pin stack above the sheer line. YES, both the bottom and top pins go above the sheer line in the lock. Then just turn the Comb pick like a key. The most vulnerable grouping of locks are 4 and 5 pin locks, and that is what the COMB .

Why do comb picks work?

Comb picks are used for opening a large number of low security locks, they work by pushing the pin stack above the shear line. This Comb Pick is designed for Master, Fortress and many 40mm and 50mm clone 4-pin solid body padlocks. Master 140 locks contain spool security pins and are easily opened with this comb pick.

How does a tubular lock Impressioning tool work?

How Does a Tubular Lock Pick Tool Work? Using tubular lock picks, you simply insert a blank key into the lock and manipulate it so the lock leaves tiny impressions on the blank. These impressions are then filed down, and the process is repeated.

How do you use picking tools?

Lock Picking Technique
  1. Insert Tension Wrench into the Bottom of Key Hole and Apply Slight Pressure. ...
  2. Insert Pick at Top of Lock. ...
  3. While Applying Slight Torque to Your Wrench, Scrub Your Pick Back and Forth in the Key Hole. ...
  4. Repeat Until All the Pins Set.

Is lockpicking easy?

Lock picking is easy to learn and apply, and in a short amount of time, you can learn all the basic lock picking concepts and techniques. While some locks are more difficult to pick than others, a fundamental understanding of lock picking can help you pick the majority of the locks used today.

(751) Using Comb Picks

Can you break a lock by picking it?

The springs in a lock are designed to withstand the simple and gentle forces of the key lifting pins. While lock picking is relatively gentle, it can still be rough enough to push the springs past their limits causing them to deform or even break.

Are tubular keys universal?

Instead, tubular locks have universal keys designed for each lock type or model. Most manufacturers produce these locks in versions, providing a single key to access all the locks under it. Thus, it prevents the use of different keys to access the tubular lock and further heightening its security.

How do you pick a tubular lock with a ballpoint pen?

  1. Cut off the end of a ballpoint pen with scissors. Remove the ink tube inside the pen.
  2. Use the scissors to cut four vertical notches at the back of the pen. ...
  3. Slide the cut end of the pen into the lock. ...
  4. Shake the lock vigorously while holding the pen with your other hand.

How do you open a tubular lock without a key?

Using a lock pick is the only verified way to open a tubular lock without the key so, if you have time to spare, purchase a pick to open your tubular lock. If you're in a hurry, you may be able to pick your lock with a ballpoint pen, but this method is less guaranteed than using a pick.

Are comb picks good?

Comb picks are highly effective at bypassing a large number of lower security locks. Comb picks work by pushing the entire pin stack above the sheer line. YES, both the bottom and top pins go above the sheer line in the lock. Then just turn the Comb pick like a key.

How do you break into a puck lock?

The key distinction here is whether the lock is exposed or guarded. If it doesn't have guards around it for protection, the quickest method is to force it using a standard pipe wrench, with the help of a short cheater pipe. Simply get a solid bite on the hockey puck and force it downward, breaking the hasp eye.

What is a tail comb?

A comb with a tapering tail or handle used in styling to lift, divide, or curl the hair. 'Using a rat tail comb gently create a series of hair loops that are pulled loose from the Twist. '

What's a 999 key?

Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.

How do you open a tubular lock with a key?

Step 1: How a Tubular Lock Works

The shape of the key is circular, open in the center, and has grooves that are cut into the outsides of the circular shape. Once the key has been fitted correctly in the keyhole, it will depress the key pins to the correct depth and the key can be turned opening the lock.

Can I drill out a tubular lock?

In terms of drill bit, you can use a tubular lock drill bit. It is specifically designed for drilling tubular locks on vending machines. It can remove the metal that covers the pins of the lock so it can be opened.

How many pins does a tubular lock have?

Most locks use between six and eight pins, although some use as few as four or as many as ten. The devices have been widely used on vending machines, elevators, public computers, and bicycle locks.

Are vending machine keys all the same?

For security purposes, vending machine keys are all keyed differently. The locks on these machines can only be opened by a key that has a compatible "key code". Key codes are what distinguish one key from another. There is no key on the market that is compatible with all key codes.

How do you pick a vending machine lock with a bobby pin?

Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.

Why do locksmiths not pick locks?

Time is money, so the only picking that is done is that which is profitable and worth it. Not all locksmiths do lockouts either, and some locksmiths would never get the opportunity to pick locks, so the only way they would get to do it is if they did it on their own for practice or fun.

What is a rake in a lock?

Raking (or rake picking, scrubbing) is a style of lockpicking used to quickly open pin-tumbler and wafer locks. Raking is characterized by the pick being lightly brushed against the components, often with an up-down motion to simulate a wide variety of component positions.

What's the hardest lock to pick?

In no particular order, here is our list of 5 Most Challenging Locks to Pick.
  1. Master Lock Speed Dial 1500iD. Seasoned Lock Picker Bosnian Bill goes over the components of the Master Lock Speed Dial 1500iD on his YouTube channel. ...
  2. The ASSA Abloy Protec2. ...
  3. Evva MCS Gen 2. ...
  4. HYT Chain Key Lock. ...
  5. Banham M2002.

What locks are pick proof?

Top 7 Bump Proof Lock Reviews
  • Schlage BE375 CAM 619 Electronic Deadbolt Lock. ...
  • Master Lock DSO0615 Bump-Proof Single Cylinder Deadbolt. ...
  • Lockey USA Digital M210 Mechanical Deadbolt Door Lock. ...
  • Mul-T-Lock ‎008J-MD1–D Cronus Single Cylinder Deadbolt. ...
  • The Lock Locker Bump-Proof Deadbolt Door Locker.

Can you pick a lock and lock it back?

Lockpicking allows locks to be bypassed with relatively little evidence, but to truly leave the scene undisturbed, steps must be taken to resecure a lock. Most common locks you will come across today can be easily relocked after they are opened without a key.

Previous article
What color should my curtains be?
Next article
How do you secure outdoor carpet to the ground?