The sensor detects when infrared light is reflected by the user. After the detection, the sensor will give a pulse signal to the solenoid valve to let it open. The whole program is designed and controlled by a microchip.
The automatic toilet flusher employs active infrared sensor technology, which detects the presence and movement of objects or persons in their area of detection by emitting and receiving infrared beams. The sensor is ready to go once it detects the body. When people depart, the water is automatically flushed.
Wrap the sensor in TP, and then when done, pull that off and drop it into the bowl to be flushed with the rest.
The most common causes of the problem are obstructions, which might be preventing the sensor from actuating. Another reason is installing bars or cabinets to close to the sensor, which may lead to sporadic flushing, especially if the cabinet doors keep opening.
If the automatic toilet won't flush, troubleshooting usually involves locating and removing any obstructions from the automatic sensor attached to the toilet tank. If the failure is not caused by a blockage, additional steps, such as replacing parts, are required.
Many smart toilets are equipped with a manual flush mechanism as a backup option in case of power failure. This mechanism is typically located on the side or near the base of the toilet and resembles a traditional flush lever. To use it: Locate the manual flush lever or button on your smart toilet.
INFRARED SENSOR
As a key part of an auto toilet flush, the sensor is like an eye to detect the movement of objects or people. Its job is to inform the valve when to start or stop the flow based on the presence and/or movement of objects or people.
Ghost flushing, or phantom flushing, occurs when your toilet tank refills independently without anyone pressing the handle. Water leaks from the tank into the bowl, causing the fill valve to activate periodically to refill the tank. It's similar to your toilet flushing itself, but it's just refilling.
To stop a running toilet, check for a faulty flapper or flush valve seal and replace it if necessary. Ensure the float is set to the correct water level, and inspect the fill valve for any issues. Addressing these common causes can help prevent unnecessary water waste and banish your ghost flushing specter.
ENERGY-SAVING: Powered by 4 AA batteries(included) which can activate up to 36,000 flushes.
Remove the tank lid to access the internal parts.
Since there is no handle, reach into the tank and lift the rubber flap from the bottom. Hold it until the tank empties, then let it return to its position on the bottom. The toilet will flush as usual, and the tank will refill.
Check The Water Shut-Off Valve
Turn it to the left – this will lock your valve in the “open” position and ensure water can get into your toilet tank. Give your toilet a few minutes to refill, then try flushing the toilet again using the toilet button.
You test it! Place a few drops of food coloring into your toilet tank, and wait 15 minutes. If the bowl turns the color of the dye, you have a leak.
Gravity vs. Pressure-Assisted: Most residential toilets use gravity-based flushing systems, where the weight of the water in the tank creates the force needed to flush waste. In contrast, pressure-assisted toilets use compressed air to generate additional force, resulting in a more powerful flush.
An unnoticed phantom flush can become a silent culprit behind a sudden spike in your water bill. If your usage has increased, but your daily habits haven't changed, it's time to investigate whether the toilet is the traitor.
The fight or flight response is a complex set of reactions that can be caused by fear and by anxiety. Flushing, or reddening of the face and/or other body parts, is one of the many side effects of these reactions.
: to circulate water or a cleansing fluid through (the cooling system of an automobile) in reverse of the normal circulation to dislodge an accumulation of sludge.
（1）IR sensors emit infrared light beams towards the toilet bowl or surrounding area. When an object, such as a person or waste, interrupts the infrared beam, the sensor detects the change in reflection or absorption of infrared light and triggers the flushing mechanism.
Simply wave your hand within 2 inches from the sensor to activate a flush.
Smart toilets' hygienic spray and drying technologies eliminate the need for toilet paper and can help people avoid putting their bodies in uncomfortable positions. Additionally, settings can adjust to fit desired water pressure and temperature, depending on the user's needs.
If you find yourself unable to flush the toilet during a power outage, don't panic. Keep a bucket of water nearby and pour it into the bowl to flush manually. This simple trick can save the day until the power is restored.