Vinegar is excellent on glazed porcelain tiles as it brings out its shiny exterior. After mopping, rinse the floor once more using clean water. Make sure to wipe the tile dry with a microfiber cloth to avoid streaking and to prevent water from penetrating the grout.
For cleaning and sanitizing, the CDC recommends a dilution of one cup of bleach to five gallons of water. Diluting bleach decreases the alkalinity and is safe for regular use on all types of porcelain and ceramic tile surfaces.
As with anything in your home that gets a lot of wear, porcelain tiles can lose that initial shine and shimmer if they are not maintained correctly. This can manifest in a few ways. Dirty grout is a common issue that can develop over time, quickly detracting from the beauty of your porcelain tiles.
The reason may be anything for your tiles to look dull or drab. It can be either grout discoloration or leftover soap or residue from all the different cleaning solutions used. If there is enough determination in us, we can get the old shine back to our porcelain tiles and make them as good as new.
If you recently had new tile installed and you are noticing a filmy, cloudy finish on your tile, there's a good chance this is leftover residue caused by your grout.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Tile Glow #2 White (6 Lb) Natural, Non-Wax Compound for The Polishing of Most Unglazed Ceramic, Porcelain and Quarry Tiles, which Gives a Long Lasting Finish and Natural Shine to Tiles.
Although polished porcelain tiles look like they have a mirror finish, it's the way they are polished to get this shine that causes optical hazing. They are polished using very hard grinding stones which open very small pores on the surface in the process.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
Damp Mop and Dry the Tile
Use plain warm water to damp mop or mix 1 gallon of warm water with a few drops of relatively mild ph-balanced dish soap. Do not saturate these floors as they will be more prone to water penetration than other materials. Dry the tiles with a clean towel or sponge after mopping.
Tile cleaner
If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
Once a month, mix 1/4 cup white vinegar with two gallons of water (or purchase one of the many suitable commercial cleansers) and apply the solution to the floor with a sponge mop. Rinse with plain water, then dry the surface completely with a clean towel or a microfiber cloth.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Cleaning the tiles with a scouring pad and warm water is the first thing to attempt. If this doesn't totally solve the problem, try a 50/50 solution of vinegar and water. The lime deposits that make up a grout haze are dissolved by the acid.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
When it comes to mopping tiles, they can collect a lot of dust and dirt. If we don't brush this away before mopping, it can build up and cause the tiles to look unclean. Even when not mopping, we recommend doing this anyway as part of a regular maintenance cleaning process.