If you're using a clear coat WRP to seal your cedar shingles, the most efficient way is to dip-apply the preservative. Take a bundle of shingles, dip them into the container of WRP, and then allow the preservative to fully dry according to the directions on the packaging.
Your best option is probably a resin-based sealer fortified with epoxy or high-quality paint. Cover as much of the wood as you can with sealant, using a small brush to get into the spaces between panels if the siding is already installed.
Wait at least 24 hours, until the wood shingles are completely dry, before attempting to waterproof them. Apply a combination waterproof stain and sealer to the surface of the wood shingles. Just like cleaning shingles, it is best to start from the top and work your way down.
If you like the natural cedar siding look, you can apply a clear coat solution to them. This clear coat solution will help prolong the life of the wood and will slow down the weathering process to help preserve the natural unfinished look of cedar.
Dirt and grime on the cedar makes it almost impossible to apply the stain to. If you are starting with a fresh install of cedar siding on your home, it is best to go ahead and seal your cedar prior to install. This will result in an easier install process as well as prevent any bleeding that may occur.
Using stain and clear coat does protect the wood and gives you a longer life for the roof or siding. The other finishing option is paint. You can paint the cedar to whatever color you wish. The natural oils in the cedar can discolor paint so be sure to apply a oil based primer coat to seal it.
The best answer is based on your home's current cedar condition. Stain lasts longer and often looks more natural, but can only be applied if cedar is paint-free. Paint offers more protection and can be a good choice for badly worn homes with previous peeling issues from past painting applications.
Reason for this is linseed oil keeps soaking into cedar shingles, nearly petrifying cedar wood shingles over time with each additional treatment. Still enjoying the beauty of cedar wood grains, without ever peeling, chipping off.
Staining cedar shingles not only enhances their beauty but also fortifies them against threats posed by the elements. Here is a helpful tip if you are thinking of staining some cedar shingles. To protect new shingles, apply a penetrating stain.
If you have weathered and discolored wood siding, you can regain the new look of cedar by cleaning off the dirt and mildew with a solution of one third cup liquid household detergent (be sure it is ammonia-free), one quart liquid household bleach (containing 5% sodium hypochlorite), and three quarts warm water.
The best clear Cedar finish stain for outdoors is Linseed oil, hands down. Linseed oil is the primary ingredient in any oil finishes, which dries clear. You can find other clear water-based stains, but will not last nearly as long as a Linseed oil based stain will.
Cedar accepts most finishes well, including penetrating oils, such as tung oil and linseed oil. Penetrating oils are especially effective for sealing the grain while leaving the wood looking raw and natural. Just like exterior applications, your interior sealing projects should start with clean cedar.
Cedar looses it's natural oils over time. An oil based sealer will help replenish most of the lost oil and protect the wood inside and out. Every two years a deck should be redone, cleaned and sealed. A new cedar deck will not hold as much oil based sealer in that natural oils are still present.
16. How Often Does Cedar Siding Need To Be Sealed? The more natural wood look you wish to preserve the more frequently you will need to maintain it. Transparent finishes, which perform like a clear and will allow the wood to turn gray quicker, will be every one to two years.
Priming and staining sustains the wood's performance and maintains its natural properties. Priming western red cedar helps the wood's natural properties stay put. Without a primer, tannins from within the cedar mix with moisture and seep to the wood's surface, naturally staining and discoloring the surface.
If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color.
You can prime and paint new shingles as soon as you have installed them, but since weathering can quickly alter the paintability of wood, if you don't get to the job within two weeks, you'll have to recondition the wood fibers.
Red cedar shingles are used as siding on a home and on the interior walls of family rooms or dens. The best way to stain cedar shingles is to dip each shingle in a bath of stain, allow it to dry, then install. Once the cedar shingle is installed, the staining process is slightly more complicated and messy.
Although cedar is naturally resistant to rot and decay, staining your siding promptly will help in the preventing of deterioration.
While paints and stains can be added during installation, having it done the first time during the manufacturing process is best because all sides of the shingle or shake can be coated. Painted or stained cedar roofing needs to be maintained with frequent repainting or restaining.
Brush the Paint Rather Than Spray or Roll
Hand-brushing is recommended. For refinishing, especially, hand-brushing is always preferred. If one chooses to spray the paint on the cedar, the best results will be achieved by back brushing the finish during application.
Spray the stain.
The best way to stain your cedar siding is with an airless sprayer and a brush.