Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Baking Soda And Vinegar
Instead of creating a volcano, this vinegar and baking soda mixture will work together to loosen up the clog in almost no time. We suggest wearing rubber gloves for this. As this method creates a pretty chemical reaction, it is recommended that you use it in a toilet bowl that is not too full.
The real danger lies in the possibility of bacteria growth. A clogged toilet is a perfect breeding ground for harmful bacteria, and if the water overflows, it can spread across your bathroom floor, creating a health hazard. Plus, if the clog is severe, it could lead to more expensive plumbing repairs down the line.
Hot Water: Boil a pot of water and carefully pour it into the toilet from waist height. The heat can help soften the blockage. Be cautious not to splash. Plunger: Use a toilet plunger. Make sure you have a good seal around the drain and plunge vigorously. The pressure can help dislodge the clog.
Solution 3: Use Hot Water and Dish Soap
When the water is extremely hot, but not yet boiling, pour the hot water into the toilet carefully. Allow this solution to sit for 15-20 minutes. During this time, the hot water and dish soap are hard at work softening and lubricating the clog in your toilet.
You'll be pleased to know that a standard blockage, caused by flushing inappropriate materials or too much toilet roll, will unblock itself eventually. However, bear in mind that the problem will continue until you've had your drains jetted or rodded to remove any leftover obstructions.
Pouring dish soap down a toilet will unclog many obstructions. Pour 1/2- to 1-cup of dish soap directly in the toilet water and wait about 30 minutes before flushing. Follow the dish soap with a gallon of hot water if dish soap alone does not work.
You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered. Use a gentle plunge initially since a hard one will force air back around the seal, blowing water all over you and your bathroom floor.
Drano for toilets is a popular choice for many homeowners when dealing with stubborn clogs. This powerful product has been a trusted solution for many years, effectively breaking down and dislodging blockages that can cause significant inconvenience and potential damage in the bathroom.
Pour several squirts of dishwashing detergent down your toilet, and follow it up with some hot water. Wait for around 30 minutes to give the soap time to work, and then, flush your toilet. If the clog is severe, you can allow the dish soap to sit overnight before flushing the toilet.
Fill a bucket with hot, but not quite boiling water and pour it directly into the drain. The combination of heat and pressure can sometimes be enough to clear minor blockages such as soap scum build-up.
DO NOT: Take the flush-and-a-prayer method of flushing again – and again - until the blockage breaks up. Chances are this could lead to overflow. DO: If water is already rising, lift the tank lid and carefully use the rubber floater to block water from filling the hole at the bottom.
Pour in boiling water.
The high heat will help soften compacted paper and flush small pieces away. Repeat using smaller amounts of boiling water if needed. Do not lean over the toilet during this.
Plumbers choose hydro jetting equipment for the most stubborn, deep-set clogs. This drain clearing tool uses high-pressure water to flush your pipes and remove years of buildup. The water jet is so strong that it can even break up any tree roots that have found their way into your sewer line.
Pour in Soap & Hot Water
Dish soap is more dense than hot water, and it's also designed to help break down grease and grime—especially mixed with hot water. It should be no surprise, then, that this mixture can also help loosen many materials that can clog a toilet bowl.
Boiling water can be a simple yet effective solution for loosening up a clog. Carefully pour some hot water into the toilet bowl from waist height and allow it to work its magic for a few minutes before attempting to flush the toilet water.
This makes it potentially harmful to your health. That also means you need to sanitize the area around your toilet. So, is it okay to leave a toilet clogged overnight? No, because you risk the clog escalating into a worse problem.
Pour 1 cup of baking soda and 2 cups of vinegar into your toilet. It will begin to fizz but this is okay. Let it sit for about 30 minutes and then try a test flush.
One common question people ask is, “Can plunging make a clog worse?” The short answer is yes, but only if you're not using toilet plungers correctly. Using too much force or plunging too vigorously can push the clog further down the drain, making it harder to remove.
For those times when you don't have a plunger on hand or it fails to clear the clog, you can try to use a toilet brush or plumber's snake to break up the blockage. You can also pour soapy and hot (but not boiling) water into the toilet bowl to try to melt the clog and get it moving.
“Dish soap serves as a lubricant for clogs and helps them slide through the pipes,” explains Justin Cornforth, an experienced plumber and CEO at Ace Plumbing.
The most common way to unclog a toilet without a plunger is by using hot but not boiling water. Heat up enough water to fill the bowl about halfway, then pour it into the toilet slowly and steadily. Let it sit in there for a while, and then repeat the process until you feel the water has started to drain.