Use Baking Soda and Vinegar
Baking soda and vinegar have the power to cut through grime for ordinary cleaning and also can tackle clogs that are out of sight. Measure one cup of baking soda and pour it into the toilet. Then, pour two cups of white vinegar onto the baking soda to create a chemical reaction that fizzes.
Using a plunger is one of the most effective methods used for unblocking a toilet as it can unclog a wide variety of waste pipes.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
When you see the symptoms of a nasty clog, the best option you have is to pour hot water into your toilet bowl. You can use the hottest setting from your faucet first. If you need to heat some in the microwave or the stovetop, you don't want it to reach boiling temperatures.
Will a toilet eventually unclog itself? It sure would be nice, but it's fairly rare for a toilet's clog to clear up after a few hours. It can happen, but only in select circumstances.
You might want to see if the clog works itself out in time. If you have another toilet you can use, let the clogged one set overnight. The water pressure that builds up in the bowl might actually cause the toilet to unclog itself. After a day's wait, flush the toilet again.
Wait about 10-15 minutes before trying to unclog the toilet, as some water might drain on its own. Squeeze a lot of liquid dish soap, about one cup, or pieces of bar soap into the toilet bowl.
Ideally, no more than five or 10 minutes. One plumber told us that if plunging goes on any longer, it's time to try a toilet snake or call an expert.
In this scenario, squeezing liquid hand soap, body wash, or shampoo into the toilet should net you the same results. STEP 2: Let the soap sit for about 20 minute so it can coat and loosen the clog for maximum flushability.
Bleach is an effective way to deal with blocked toilet drains as it is a dilute solution of sodium hypochlorite and also contains a high chlorine concentration. Using bleach by itself or mixing it with boiling water are effective ways to unclog a toilet.
Hot Water and Dish Soap
Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.
So, let's recap the common reasons why a toilet won't unclog — excessive toilet paper use, non-flushable solids, hard water, and clogs in the main sewer line. Thankfully, they can be prevented via methods like double-flushing, covering the toilet bowl, routine inspections and dealing with tree roots.
You may be surprised to learn that pouring soda down the drain does work for some clogs. To be specific, you need a dark-colored cola (such as Coca-Cola or Pepsi). This type of carbonated beverage usually contains a good amount of phosphoric acid, which given enough time, can eat away at some types of clogs.
How to Unclog a Toilet With a Plunger. After the water is turned off, try using a conventional plunger to unclog the toilet. Be sure the water covers the cup of the plunger; if it doesn't, you may need to manually control the flapper until enough water enters the bowl.
Cola Drain Cleaner Trick
Allow a two-liter bottle of soda to come to room temperature. Pour the entire bottle down the clogged drain.
You can unclog drains with the power of acids and bases. Pour about 1/2 cup of baking soda into the drain, and follow it with 1 cup of apple cider vinegar. It will fizz and foam, breaking down the clogs and deodorizing. After about 15 minutes, pour hot water down the drain.
Check water level in toilet bowl
Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
How to Tell if Your Toilet is Clogged. Signs that your toilet (or sewer line) is blocked include: The water does not flush properly, stays in the bowl for long periods or ends up overflowing over the top of the bowl. When the toilet is flushed, water starts to gurgle up in your shower or bathtub drain.
If you can't unclog the toilet using a plunger or a snake, your next best option is to use boiling water. Boiling water can help to dissolve the clog and free up the pipes.
In most cases, you can leave a clogged toilet overnight. However, calling an emergency plumber near you might be warranted if water starts leaking from the pipes.
The longer you leave a clog, the more opportunities there are for the clog to get worse. The most water-soluble parts of the clog will dissolve, and the rest will fill in the gaps, making the clog worse. There is also the possibility that human error could come into play.