A foul smell from the drain or faucet is a less-obvious warning sign. Odors are unable to filter out of the frozen pipe and instead are forced back into the home's faucet. No water or a slow trickle when a faucet is used. Whistling and banging coming from pipes, or strange bubbling sounds when you flush a toilet.
Frozen pipes will eventually thaw on their own, but it could take days or even weeks. If New York City is experiencing a brutal cold snap, the temperature could stay below freezing for many days. Meanwhile, the water in the pipes could be expanding.
Can You Flush the Toilet If Your Pipes Are Frozen? In most cases, no. Attempting to do so can cause pressure buildup in the pipe and lead to bursting. Additionally, flushing a toilet with a frozen pipe can result in unsanitary conditions due to a lack of proper drainage.
Not all frozen pipes burst. However, thawing the ice can increase the risk, as it usually worsens the problem since it raises the pressure further.
But if they have running water, it's likely your pipes have frozen. Turn off the water immediately at the main shut off valve. Open the faucet so that water will flow through the pipe once the area is melted. This will help melt more ice.
Turn on all faucets: Checking each faucet in your home will help you narrow down your search. The faucets that have little or no water pressure likely have a frozen pipe in their supply line. If every faucet is showing low water pressure, the frozen pipe may be near the water meter.
The job goes more quickly by pouring hot water or a mixture of vinegar, baking soda and salt water down the drain. Space heaters, hair dryers and heating pads are highly efficient tools for unfreezing a drain pipe. If a frozen drain line ruptures, turn off your home's main water supply.
Your pipes will eventually thaw on their own, but this will take at least a few hours or potentially several days, depending on where the pipe is located and the air temperature around it.
Thawing Frozen Pipes
While you wait, reduce water pressure by opening all the faucets inside the home one-quarter turn. Water will begin to trickle out, helping the ice to thaw. Remember to close all faucets after full water pressure is restored.
Manually thaw: Begin the thawing process at the most vulnerable places (near faucets). By targeting these areas first, your pipes will be less likely to burst. To do so, gently apply heat to the frozen areas. A blow dryer is a good option (use caution, go slowly, and don't use an open flame).
Turn the Heat Upin the Property: You can attempt to thaw the frozen pipe by increasing the temperature in the property. Turning the thermostat up may be all that is needed to allow the ice blockage to melt.
Apply heat to the section of pipe using an electric heating pad wrapped around the pipe, an electric hair dryer, a portable space heater (kept away from flammable materials), or by wrapping pipes with towels soaked in hot water.
You Hear a Gurgling Sound When Water is Flowing
The most prominent sign that your pipes are clogged is a reduced flow rate. Whether it is your shower pipe, faucet, or drain if you see that the water does not flow as fast as it should then you're most probably dealing with some sort of blockage in the pipes.
If the problem is localized to your home, check faucet and water main shut-off valves, look for leaks or burst pipes, rule out frozen pipes, and perform similar checks to diagnose the issue. If you can't find a reason, it's best to call a plumber near you.
Burst pipes will need to be replaced and a plumber is best equipped to handle the job. The average hourly plumber rate is around $330, depending on where you live and the size of your job. As long as your frozen pipes haven't burst, a plumber will likely charge a flat fee of around $100 to thaw them out.
Pipes typically burst when exposed to extremely low temperatures for an extended period of time (anywhere from 1-3 days depending on temperature). This is especially true for pipes located on exterior walls.
If you suspect that your outdoor faucet is frozen, there are a few ways to tell. First, check the temperature of the faucet; if it is cold to the touch, this could be a sign that it has frozen. Additionally, if water isn't coming out when you turn on the tap, this could also indicate freezing.
If you suspect that there are pipes in or above the garage, use space heaters to heat up that space as well. Make sure to keep heaters away from anything potentially flammable! Your pipes will eventually begin to thaw on their own once the temperatures rise above freezing.
When should I call a plumber if my pipes are frozen? As soon as possible, Garton said. Pipes are more likely to burst the longer they stay frozen, said Garton. He said that the likelihood of your pipe bursting depends on the material.
The clearest sign that you have frozen pipes is if there is a complete lack of water coming out of your faucets and fixtures. This means that the water in your supply lines has frozen solid. In some cases, due to a partial freeze, you may still see a slight trickle of water.
If the pipe is behind a wall, you can turn up the thermostat and wait for the thaw. Or you can hook up a lamp to warm the area. Infrared lights work best because they don't warm the air, just the pipes behind the wall. If the pipe is exposed, you can heat it with a hairdryer.
The pipes most likely to freeze are those nearest to an uninsulated wall, door, window, garage, attic, basement, or along an uninsulated floor. Add insulation to exterior walls wherever possible and wrap pipes with insulation. Eliminate cold drafts near water pipes and your water meter.