If your
Remove the AC power to the home alarm console from the wall directly. Use your console's access key (or another item such as a small screw) to unlock and open the system's backing. Lastly, disconnect at least one of the wires that are attached to the system's main battery, which is blocky and noticeable in most units.
In situations like this, it is inevitable that an engineer has to be called out from the company, who installed the alarm, to reprogramme the system and set it with a new code.
Whenever a security alarm system is installed, it is set to a default code. The default codes are easy like 0000 or 1234 and many people forget to change it. Changing default codes is very important since many thieves are well aware of the common default codes. The default codes may leave you at high risk.
Most systems will begin beeping or chirping as a result of a total power outage or failure to recharge the system backup battery. For many of our most popular systems, beeping alarms and low battery trouble beeps can be silenced by pressing the [OFF] or [#] buttons from the keypad.
The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system. You can arm and disarm the system and any partition on the system if you are using multiple partitions.
Most modern alarm systems are fitted with an automatic cut-off device that will stop the alarm from sounding after 15 minutes, so chances are that if you wait, the alarm will stop on its own.
Reset the home security system
Even though you can turn the alarm off on your home security system without assistance, you cannot reset it on your own. Contacting the security company will allow you to have the system reset, although this may mean creating a new security code or pin number.
If you have a wireless burglar alarm, it shouldn't cost you anything to remove. That's because you can just unscrew it from the wall yourself. On the other hand, if your burglar alarm is wired in, you'll want a professional to safely disconnect it for you.
Most home monitoring services will automatically dispatch local police if your system loses power. Disconnecting wiring or causing the old system to lose power may set off a false alarm, resulting in an unnecessary emergency response that could land you with a fine.
Your card security code (CSC), verification code (CVC), or card code verification (CCV) can be found on the back of your card and is usually three or four characters long. This code provides an additional measure of credit card security when you use your card online.
The user code is a four-digit number that you or the previous owner of the house set when installing the alarm system. If you don't know your user code, you can try some default codes, such as 0123, 1234, or 9999.
1234 is the most frequently used four-digit code, but other sequential number codes are popular choices as well. Avoid sequential numbers, both forward and backward such as 5678, 9876, etc.
The default installer code may be something simple like 1111 or 9999. Try that first. If that doesn't work, check the user manual or call your security company.
Moved house: deciphering codes
If the previous occupier hasn't left you the code, then it's best to ask an alarm company for help to reset the system and programme in your own personal code. Newer systems often use a setting tag or fob. Again, these would normally be left for the new householder.
If your house alarm keeps going off, consider these possibilities: System Issues – Possible wear and tear, outdated components, or the need for servicing may cause false alarms. Environmental Factors – Open windows can let in wind which can cause objects to move and trigger sensors.
Simply cut the power supply to the system by turning it off, unplugging its transformer, and removing the backup battery. After a couple of minutes, replug everything you just unplugged, and the system should come back completely reset.