Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
The best way to clean limescale from a toilet is to have a toilet cleaner that can get into those hard-to-reach places. Harpic Power Plus or Harpic Limescale Remover are perfect for the job as the U-shaped bottleneck enables precise application to remove limescale from the toilet rim.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
First, flush the toilet and then pour a quarter of a cup of Borax into it, using your toilet brush to swish it around. Next, add one to two cups of vinegar and let the mixture sit for 20-30 minutes. You should be able to scrub the stains away and flush the toilet to reveal a fresh, and clean bowl.
For Mineral Scale
Heat 1 to 1 ½ cups of white vinegar to about the same temperature you'd take your coffee – not scalding, but warm enough. Add it to the overflow tube and give it about 30 minutes to work. Flush, then go to work on the jet holes, chipping away the scale with something small but solid.
To clean toilet jets using CLR, follow these steps: Step 1: Do the bucket trick to lower the water level in the toilet. Step 2: Pour CLR into the overflow tube in the toilet water tank. The CLR liquid will enter the rim jets and quickly break down the lime inside, and run out of the rim jet hôles into the toilet bowl.
Apply baking soda to the tarnish and leave for a few hours. You can also use baking soda in combination with vinegar. Try a mild urine scale remover or limescale remover to tackle brown deposits.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Yes, CLR Bath Cleaner is specifically designed to tackle hard-water stains, along with calcium and lime deposits. It's a powerful solution for sinks, tubs, and showerheads. Spray it on the affected area, let it sit for a few minutes, then scrub and rinse thoroughly.
It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
To do this, you can use Lysol® Power Toilet Bowl Cleaner, which both cleans and disinfects your entire toilet and is especially angled to hit your toughest stains directly under the rim.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
The citric acid in lemon or acetic acid in vinegar is your best weapon, ensuring a limescale-free bathroom without the need for abrasive chemicals that can damage the finish on your bathroom fittings.
A black fungus or mold is thought to be the cause of the black slime. These types of fungi are common inhabitants of our environment and can be found in many places, including human and animal feces, dust, soil, and in surface water.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Use your gloved fingers to apply the toilet cleaner or paste under the entire rim. You need at least a thin layer all the way around. Let it sit for 15 minutes, then scrub vigorously under the rim with your toilet brush. Finally, get out the hand mirror and locate the water jets.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Pour half a bottle of vinegar essence into the toilet bowl in the evening and leave it to work overnight. The next morning, you will be able to easily clean off any urine scale, thanks to the acetic acid it contains.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
Removing limescale from the toilet rim can be very tricky as you need a cleaning solution that can defy gravity and cling to the rim of the toilet. Thankfully, you have one. Create a thick paste of vinegar and bicarb, and just before you apply it to the rim of your toilet, give the rim a wipe to remove any water.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.