White vinegar The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Pour a half-cup of bicarbonate soda in the bowl, and let it sit there for 15 minutes. “Apply white vinegar on top of the baking soda. This causes a fizzing effect that activates the acids and can dissolve even the most stubborn limescale buildups. After about 10 minutes, use a scouring sponge to scrub the toilet bowl.
Lemon juice and vinegar are both acidic, meaning that they can break down the calcium carbonate that limescale is made from. Here's how you can use these green cleaners to your advantage. It's worth noting that we're talking about distilled white vinegar here, not malt vinegar.
Yes, Coca-Cola can help remove hard water stains from toilet bowls due to its acidic content, primarily phosphoric acid. The carbonation and acidity can break down mineral deposits and stains. Here's how you can use it:
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Clean Your Toilet Bowl with Coca Cola
To try this method, simply pour one litre of Coca Cola into the toilet bowl and leave it to sit for an hour. This gives it time to work its magic. Come back an hour later and give the toilet bowl a thorough scrub before flushing and you'll find no more limescale!
HG limescale remover concentrate is the ideal strong limescale remover for removing stubborn limescale. This heavy duty limescale remover also removes rust and urine stains as well as verdigris.
#1 White Vinegar
White vinegar is the best CLR substitute. It's great for the environment and it's super effective at breaking down rust and limescale.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Pouring a small amount of lemon or vinegar into your toilet once a month can help prevent the build up of limescale deposits. The acidity of these will help wash away any smaller limescale deposits without the need for intense scrubbing.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
A mild, natural acid, such as lemon juice or vinegar, can be very effective at nipping calcium deposits in the bud. Depending on the severity of the stain, the liquid might have to be reapplied and scrubbed vigorously several times with sandpaper or a rag.
Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
Two of the most effective substances are lemon juice and ordinary vinegar. Lemon juice is usually the best (and will also leave a lovely smell behind). Stronger pickling vinegar and lime juice are both even more acidic and can be used for really stubborn deposits.
Viakal No1 Against Limescale* Spray Classic 750ml features anti-droplet technology for enhanced cleaning efficacy. Suitable for bathroom sanitary ware including sinks, bathtubs, bidets, and showers. Also effective on taps, chrome surfaces, and kitchen sinks.
White wine vinegar is often championed as a great household product that gets rid of limescale. And while it is good for dissolving limescale in kettles, for example, when it comes to your surfaces, you should use a specially formulated cleaning product, such as Viakal Limescale Remover.
Allow the baking soda and vinegar mixture to sit in the toilet bowl for about 30 minutes to overnight depending on the clog. This waiting period gives the solution enough time to work on softening and dislodging the clog. While you're waiting, carefully add hot water into the toilet bowl.
Limescale is not easily removed so you can just wipe it off with a cloth soaked in lemon juice; you need to leave the acid working for an hour or even more to fully remove limescale.