Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Turn off the water to the toilet, flush it, take a shop vac and suck the water out of the toilet bowl. Fill with a few ounces of citric acid and not boiling but very hot water. Let it sit for a few hours. Flush and much of it should go away. Repeat as necessary.
Soak paper towel or toilet paper in the strongest vinegar you can find (look for cleaning vinegar, 10% acid) and make blobs like paper mache that will stick on the porcelain. Close the lid to slow evaporation, and leave the vinegar on the stains for several hours. Remove the mache, and scrub with a stiff brush.
Empty your toilet bowl, add a generous amount of baking soda and add vinegar to it. Let it sit for 10-15 minutes scrub, repeat if necessary. Hope this helps!
Vinegar and Baking Soda Solution – If you want a natural solution for cleaning toilet bowl stains, made with vinegar and baking soda, start with the vinegar. Pour a cup in your bowl and swirl it around with the toilet brush. Then add 1 cup of baking soda and another cup of vinegar. Leave to soak for up to 30 minutes.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
You see, the brown film on the bottom of your toilet bowl is actually a build up from hard water.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Pour lemon juice or vinegar on the deposits. Don't dilute the vinegar or lemon juice, or you'll reduce its effectiveness. Leave the acidic liquids in place for a few hours to do their work, preferably overnight. Scrub the scale with a stiff-bristled toilet brush before flushing the toilet.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
To do this, you can use Lysol® Power Toilet Bowl Cleaner, which both cleans and disinfects your entire toilet and is especially angled to hit your toughest stains directly under the rim.
Clean Your Toilet Bowl with Coca Cola
To try this method, simply pour one litre of Coca Cola into the toilet bowl and leave it to sit for an hour. This gives it time to work its magic. Come back an hour later and give the toilet bowl a thorough scrub before flushing and you'll find no more limescale!
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
They either dump the entire bottle directly into the toilet tank, or cut a hole at the bottom of the bottle and place it inside the tank. The idea is that whenever they flush, the toilet bowl itself will fill up with the sweet smell of Fabuloso, negating any unsavory scents that might otherwise be lingering.
They come in particular use for deep-cleaning the toilet because of their limescale removal properties and effectiveness at clearing hard water stains. The method couldn't be more simple, either. When you know the bathroom will be vacant for a prolonged time, simply drop one full dishwasher tablet down the toilet.