How do you hang curtains over blinds?

Author: Anastacio Pagac DVM  |  Last update: Saturday, June 11, 2022

How to Hang Curtains Over Blinds the Easy Way
  1. Tap a Kwik-Hang curtain rod bracket into your window casing with a hammer.
  2. Thread your curtains through your curtain rod.
  3. Insert the curtain rod into the bracket, and you're done!

How do you hang curtains over blinds without drilling?

Here are five ways to hang curtains without damaging walls or window frames:
  1. Use 3M Command Hooks.
  2. Use Kwik-Hang Curtain Rod Brackets.
  3. Use Tension Rods.
  4. Get Creative With Coat Hooks.
  5. Try Magnetic Rods on Metal Doors.

Is it OK to put curtains over blinds?

We often get asked the question 'do curtains and blinds work together? ' The answer is, for the most part, 'yes' – when paired, the two can bring out a flexible décor and ensure adequate blocking of light and privacy control.

Should you hang curtains over blinds?

Hanging curtains over blinds adds extra depth and elegance to your windows, as blinds alone can look cold or unfinished. Sometimes hanging curtains on their own is sufficient, but occasionally you need to add extra privacy or light control.

What can I use in place of a curtain rod?

Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

HOW TO HANG CURTAINS OVER VERTICAL BLINDS| NO HOLES OR TOOLS| APARTMENT FRIENDLY

How can I hang curtains without a rod?

Five Creative Ways to Hang Curtains Without Rods
  1. Upholstery tacks.
  2. Tension cables.
  3. Hook-eye screws and drapery pins.
  4. Staples and furring strips.
  5. Cabinet knobs.

Which Command hooks for curtains?

Purchase 2-3 jumbo command hooks per window. Pick a finish that is the same as the curtain rods you will be hanging. Clean wall surface where you will be applying hooks with rubbing alcohol and clean cloth or paper towel. Clean gently, rubbing too hard can remove the paint.

Will Command strips hold up a curtain rod?

And the answer is brilliantly simple. Look no further than 3M Command hooks. Yes, the same hooks you use for hanging pictures, keys, mugs, and plants. An easy hack turns them into quick DIY supports for your curtain rod and that splash of color, sun shade, or bit of privacy you've been searching for.

Will Command strips hold a curtain rod?

Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.

How much weight can Command hooks hold?

Ignore the Weight Restrictions

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

How do you hang curtains when the window is at the top of the wall?

The following interior design guidelines should help.
  1. Hang curtains at least 4 to 6 inches above the top of the windows.
  2. For high ceilings, keep curtains within 8 inches from the tops of windows.
  3. Reassess if you have arch or transom window depending on the amount of light and privacy you desire.

How do you make a homemade curtain rod?

How to Make a DIY Curtain Rod
  1. Measure your window. ...
  2. Cut your pipe. ...
  3. Paint the rod. ...
  4. Paint your hardware. ...
  5. Attach your brackets to the wall. ...
  6. Attach your curtain rings to the rod. ...
  7. Attach your finials to the rod. ...
  8. Attach your curtain and place your rod on the wall.

Can you hang a curtain with string?

Here are a few ways you can use rope for your curtains: Create tension in the rope by tying the ends directly to the curtain rod brackets. You can also use curtain holdbacks to secure the rope further down the wall. Avoid hanging heavy drapery when using rope in place of a curtain rod.

How far should curtain rods extend past the window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.

Can you use wooden dowels as curtain rods?

By styling wooden dowels to look like copper rods, the DIY curtain rods were so inexpensive (just $12 apiece!) that we had money left over to craft statement-making tiebacks to match. Measure your window, then cut the 1-inch wooden dowel to a length at least 5 inches longer than your window is wide.

Can you hang curtain rods without drilling holes?

Dowels and Sticky Hooks

And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

What are the different types of curtain rails?

Curtain Tracks By Type
  • Metal & Plastic Tracks.
  • Corded Tracks.
  • Bay Window Tracks.
  • Uncorded Tracks.
  • Double Curtain Tracks.
  • Track & Valance Sets.

What is the easiest way to hang a curtain rod?

Before we talk about HOW to install your curtain rods, let's talk about exactly WHERE to put them.
...
  1. Step 1: Determine Your Measurements. ...
  2. Step 2: Make Your Cardboard Template. ...
  3. Drill Pilot Holes. ...
  4. Drill Larger Holes & Add Anchors. ...
  5. Install Your Curtain Brackets To The Wall. ...
  6. Add Your Rod & Curtain Panels.

How do professionals hang curtains?

Rest easy — we've got you covered with our fool-proof curtain-hanging tips and information.
  1. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible. ...
  2. Hang them wide. ...
  3. Hang them in the right length. ...
  4. Hang the right amount of panels. ...
  5. Hang the right style of panel.

How do you hang curtains on the wall?

Hang the Curtain Rods
  1. Position your first wall mount bracket on the wall where you made a mark. ...
  2. Repeat the first step on the other side of your window. ...
  3. Drill guide holes where you've placed your marks for the mounting hardware. ...
  4. Fasten the brackets to the walls using your drill or screwdriver.

Why do my command strips keep falling?

Any dust, dirt, or residue can make it hard for the adhesive to form a strong bond. I recommend cleaning the area with a Magic Eraser, because it's quick and easy, and will thoroughly clean most surfaces. After using the Magic Eraser, wipe the area with rubbing alcohol to leave it squeaky clean.

What are the strongest command strips?

Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more.

What will Command hooks stick to?

To what surfaces will Command™ Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. Command™ Outdoor Products can also be used on smooth, sealed and finished surfaces including vinyl siding and fences, doors, windows, decks, gutters and trim.

Previous article
How much does it cost to put hardwood floors in a 12x12 room?
Next article
How long after using algaecide can you use clarifier?