Before cleaning, we recommend decluttering and sweeping your patio so it is clear of any debris or dirt. Once your patio is clear, pour the vinegar solution over the areas that need cleaning and leave for 20 minutes. Once the time is up, give it a good scrub with a gardening brush and rinse it away.
One of the best things for household stains is white vinegar, and the same can be said for how it targets stubborn garden dirt. This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
The set time for vinegar can be up to 30 minutes. For example, to clean the insides of food-stained pots and pans, soak them in a mixture of one-half cup of white vinegar diluted with one gallon of water for 30 minutes. Then rinse in hot, soapy water.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Leave the white vinegar for 1 hour or so to let the vinegar work its way into the paver slabs. Spray the surface with soap and water, then scrub off. Rinse with warm water, then let dry. You may repeat the process if there are stains left.
To clean smaller surfaces areas, pH-neutral soap, a little water, and a brush are suitable. If you want to clean larger areas of natural stone efficiently, you can reach for the electric patio cleaner or work with the pressure washer and a surface cleaner.
In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.” “White vinegar is also safe to use as a patio cleaner – in fact, it has many benefits as it is environmentally friendly, non-toxic, and non-chemical.
Experts say they can do the trick for the patio as well. 'You can remove black spots easily from patios in an eco-friendly, low-cost way, with white vinegar,' says Laura Harnett, Founder, Seep. 'It has antifungal and antibacterial properties and will also stop the mould or lichen growing back.
How to clean your patio with vinegar. In a bucket, mix your white vinegar and water in a 1:1 ratio.
Not only is it safe for you and the environment, but it's also inexpensive and readily available. Just use caution when cleaning unfinished concrete with vinegar. Do not let vinegar sit on unfinished concrete for longer than ten to 15 minutes, or it will cause damage.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
White vinegar will not damage your concrete. However, leaving this solution for an extended period will damage the cement that binds the concrete together. Hence, you should be careful when using vinegar on your concrete, especially if you will use this solution on polished concrete.
Paving slabs
Scrub using a stiff brush and a patio cleaner (we recommend HG Patio Cleaner). Alternatively, use a pressure washer that has a patio cleaning attachment. GHI Tip: If you are planning to blitz the slabs with a pressure washer, take care not to remove the pointing between paving stones.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
The only real side effect from leaving vinegar to its own devices is that its acidity will gradually decrease over time, making it less potent. This is why a "best by" date can be found on the bottle, but it's still perfectly fine long past that — it isn't an "expiration date," by any means. Vinegar does not expire.
The time that white vinegar should sit on the tile before cleaning depends on the severity of the stains or buildup you are trying to remove. In general, it is recommended to let the white vinegar solution sit for at least five to ten minutes to penetrate and dissolve any dirt, grime, or soap scum on the tile surface.
To clean your pavers with vinegar, mix equal parts of water and vinegar in a bucket, let it sit on the pavers for an hour so that the vinegar has time to work, then scrub the surface with a brush or a sponge. Make sure you choose white vinegar for household cleaning, as other types of vinegar can stain.