Combine two parts water with one part white vinegar in a spray bottle and you'll be all set with a homemade window cleaner. You can also combine warm water with a few drops of dishwashing soap if you prefer. Invest in a glass spray bottle to mix up your formula.
Distilled vinegar and hot water
A true tried and tested method, distilled vinegar and hot water has proven to be one of the most successful methods to clean your windows. Since vinegar has an acidic composition, it's quick in breaking down the thin film of grime that collects on the glass' surface.
Just add a splash of vinegar to the bucket of water. Vinegar dissolves ingrained dirt and makes your windows shiny clean, without leaving streaks.
Mix a simple solution of vinegar (white distilled) and water, and using a spray bottle, spray the solution to trouble spots on your windows. Let the vinegar solution sit for 2-3 minutes before cleaning off with a cloth.
When hard water dries on glass surfaces, it leaves behind minerals that build up and form chalky white deposits over time. This glaze looks unassuming at first, but after spending time in the sun and wind, it becomes bulkier and more difficult to remove, creating a murky haze over your glass.
Professional window cleaners like Window Genie are trained and experienced in this battle. Window Genie uses a polishing paste specifically designed to fight the minerals that create these stains. The paste is applied to a non-abrasive cleaning pad and the window is lightly scrubbed.
Benz Oxy Cleanze is the simplest, easiest and safest way to rapidly remove limescale from window class. No hard scrubbing or scraping required.
Use Distilled White Vinegar
Distilled white vinegar is a mild acid (acetic acid) that will help break the bonds the hard water minerals have formed with the glass surface. You can also substitute fresh lemon or lime juice (citric acid) in the cleaning solution.
Mix up your window-cleaning solution: In a plastic spray bottle, mix together 2 cups of warm water with 1/4 cup white vinegar and 1/2 teaspoon of Dawn. Sweep away dirt: Using a broom, sweep away the cobwebs and debris from the windows and sills.
Step 1: Boil the Gunk Away
The easiest and simplest cleaning method is to soften the burnt-on grease with boiling water and dish detergent. Fill the pot or frying pans with water from the tap, and add a few drops of dish soap. Place the pans on the burner, and let the water come to a simmer.
When you want to see clearly again, the best way to clean windows and other exterior glass around the house is with CLR® Calcium, Lime & Rust Remover.
A vinegar spray is more useful for removing hard water stains from other surfaces, like glass shower doors and shiny faucets. Like vinegar, the acidity of lemon juice cuts through dried minerals, eliminating the stain.
Using WD-40®: WD-40® Multi-Use Product is great when it comes to mirror cleaning and water spot removal. It is easy to use and all you have to do is spray the liquid on to the affected area and wipe it clean with a clean cloth. It will leave your glass windows and mirrors sparkling clean and as good as new.
Distilled White Vinegar and Lemon Juice
Let the cleaning solution work on the stain for about five minutes. Use a microfiber cloth to rub the stained area until the stain is gone. Rinse the area with a clean camp cloth. Dry the glass.
That's right. The fizzy drink can actually remove hard-to-clean stains on the inside of a toilet bowl. You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating.
You can clean water marks off of clear glass with CLR® Calcium, Lime & Rust Remover.
Almost all windows have an insulated glass unit (IGU) inside of them. An IGU doubles the R-value of a glass window, increasing its energy efficiency. Foggy windows occur when the seal around the IGU begins to deteriorate. Over time, the seal around your insulated windows will begin to decline.
Smears and streaks on windows are mainly caused by watermarks and areas where cleaning solution has remained on the surface – this is down to excess moisture not being absorbed when wiped away. Window cleaning products will say that they are streak-free, but it is not that simple.
Silica Desiccant
A desiccant is an absorbent material designed to maintain dryness in the space it protects. In a double-paned window, silica pellets inside the aluminum perimeter strip absorb moisture from any incoming air that enters the space between the panes.