Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
First, flush the toilet and then pour a quarter of a cup of Borax into it, using your toilet brush to swish it around. Next, add one to two cups of vinegar and let the mixture sit for 20-30 minutes. You should be able to scrub the stains away and flush the toilet to reveal a fresh, and clean bowl.
Use Dish Soap or Baking Soda and Vinegar (optional): - Pour a generous amount of dish soap into the toilet bowl. Let it sit for 10-15 minutes. - Alternatively, you can pour a mixture of baking soda and vinegar (about 1 cup of each) into the toilet. Let it fizz and sit for 30 minutes, which may help dissolve the clog.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
Unblocking your toilet using washing up liquid
Start by squeezing in about half a bottle of the washing up liquid, which will then sink to the bottom of the toilet bowl. Next, pour in the bucket of water to flush the washing up liquid down the u-bend. With a bit of luck, this will clear the blockage.
Put on your gloves and remove the toilet tank's cover. Pour white vinegar into the empty tank, filling it to about an inch below the rim. Let the vinegar sit for 12 hours. Scrub the tank's interior with a plastic bristle brush.
Test on a hidden area before applying to the entire surface and apply directly to the stain with a brush, cloth, or sponge and let soak for 2 minutes. Rinse promptly with cold water. Never leave Calcium, Lime, and Rust Remover on an area for longer than two minutes or mix with other household cleaners or bleach.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Pour in boiling water.
The high heat will help soften compacted paper and flush small pieces away. Repeat using smaller amounts of boiling water if needed. Do not lean over the toilet during this.
Brown stains in a toilet bowl are often caused by rust, which can be due to iron in the water, hard water deposits or old pipes. The stains can also be caused by calcium or mineral deposits.
Check your water levels
Low water levels in your tank are common causes of toilets filling up with water when flushed. They can also cause slow-draining toilets. You can manually top up your tank with water to help the flush. Then, check the flush tube for cracks and bends that lead to leaks.
You'll be pleased to know that a standard blockage, caused by flushing inappropriate materials or too much toilet roll, will unblock itself eventually. However, bear in mind that the problem will continue until you've had your drains jetted or rodded to remove any leftover obstructions.
Letting a clogged toilet sit too long can result in more severe problems. Beyond the risk of overflow and water damage, the clog could also cause toilet water to back up into other parts of your plumbing system, affecting sinks, showers, and even your home's main sewer line.
A very good method of unclogging a toilet without the need for a plunger is to use dishwashing liquid, especially if the obstruction is only partially blocked or results from grease or organic waste.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Although this nuisance means more scrubbing the toilet bowl (more on the best pro cleaning tricks below), there's a chance it's also a clue you should get your blood sugar checked. As strange as it sounds, frequently seeing mold in your toilet could be one of the first signs of diabetes.
Scrub it away
Use plumbers cloth or pumice stone to remove calcium deposits in your toilet bowl. Whichever method you choose, apply plenty of water before you start. Wet the cloth or pumice stone, and focus on the stains when you scrub.