Most cleaning experts recommend using a pH-neutral, stone safe cleaner. Spray the product onto the surface and allow some time for it to break down the compounds of the residue. Use a soft cloth or a non-scratch pad to rub and scour the area as it helps to even the surface.
White vinegar spritzed onto the tile will do a great job if you let it work for about 30 minutes and then scrub and rinse. Yes, there may be a slight odor, but your pebble-stone shower floor will look good for years.
To that end, you can go for an all-purpose solution with equal parts dish soap and white vinegar. To make the combo even more potent, feel free to add a couple of drops of antimicrobial essential oils. Another powerful mixture consists of three quarts of hot water, ½ cup ammonia, and ½ cup distilled white vinegar.
How do professionals clean showers? Professionals use acid-based cleaning solutions like vinegar for hard water spots and soap scum. For deep-set soap scum, cleaners will use heavy-duty detergents and degreasers. Bleach cleaning solutions are best reserved for cleaning the mold and mildew from grout.
Natural stone should be cleaned once a week with a pH-neutral cleaning product like Simple Green All-Purpose Cleaner. The powerful cleaner dissolves tough soils and buildup without damaging your beautiful stone surfaces, and removes soap scum, body oils and greases, bath oils, soap, and shampoo oils.
Clean with a microfiber towel or nylon pad.
To avoid detrimental scratches, clean tile and stone with softer sponges. Nylon, microfiber, and soft brushes will help clean stone without damaging its sealant. You can also keep a microfiber towel near the shower to easily soak-up and remove excess water after each use.
Depending on where you live, you may to battle hard water stains on your pebble stone shower floor. If you start noticing white spots on your floors, it's time to take action. Spray your pebbles with white vinegar and let sit for about 10 minutes. Then, simply scrub and rinse.
Scrub with Bleach and Water
Prepare a 50/50 solution of bleach and clean water to use with a soft nylon brush or pad. Allow the bleach and water solution to sit for about 15 minutes after the first scrubbing session, then finish the job by rinsing with clean water and using natural stone cleaner and sealant.
The simplest answer is no, it is best to avoid bleach when cleaning any type of natural stone. Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state.
Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
If you want to attempt to remove product residue or hard water build up yourself, spray the stone with a pH-neutral, stone-safe cleaner and allow ample dwell time to soften the residue. Then using gentle pressure and a white Scotch Brite pad or a Dobie pad, clean the stone.
Most water spots on natural stone can be easily removed by a specialty cleaner. Use a non-scratch pad or a soft cloth to rub and scour the area for a few minutes. After, rinse away with water. Make sure that any water you use to rinse the stone is thoroughly dried up afterwards to avoid any new hard water spots.
On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone. Small amounts can be removed with lacquer thinner or scraped off carefully with a razor blade.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Use baking soda/baking powder and water solution
Baking soda or baking powder can be used to clean mold off natural stone showers. Make a paste of baking soda or baking powder and water, and apply it to the moldy areas. Let it sit for 30 minutes, then scrub with a brush. Rinse with water and dry the area.
If you see a white, powdery residue on your stone, it may be a sign of efflorescence. It's a clear indication of water damage. The sooner you catch it, the fewer repairs you'll have to do.
Many hotels use ammonia-based cleaning solutions because ammonia readily cuts through dirt and soap scum. Because of the way it dries, ammonia also decreases the possibility of streaks on glass. That being said, exercise care when handling ammonia.
Baking soda and hydrogen peroxide are items you can get easily—you may already have them in your home! To make a cleaning paste for your tiles, mix half baking soda and half hydrogen peroxide. Then, put the mixture on the stained tiles and leave it sitting for one hour. After time's up, rinse the tiles.
'Mold can cause various health issues, including respiratory problems and allergies, making it crucial to maintain a clean and mold-free shower area. Cleaning at least once a week, or even more, will help to combat that. '