Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Scrubbing Brush and Bucket
Ahhhh the good old-fashioned scrubbing brush. It's been around for such a long time as it genuinely works. When those bristles are passed over the target surface vigorously enough, it'll remove most dirt and stains.
Yes, using vinegar is a good choice for cleaning pavers and very effective as well. Once vinegar is a non-toxic and biodegradable solution, it is a great way to clean your pavers without resorting to chemicals, which is safer, since you don't harm your plants, pets, or the soil.
Scrub off the stains and the vinegar with some good old soap and water. Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.
All you do is add soap or cleaner, screw it onto the end of your garden hose and start spraying. David had the front of our house soaped up in no time. We let the soap work its magic for 10 minutes as the cleaner packaging instructed. I used a bristle brush to scrub some of the really dirty spots.
To keep it truly simple, just squirt dish soap into a bucket of warm water and mix thoroughly. For vinyl siding or painted homes, you can add vinegar for extra cleaning power.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
If vinegar does not do the trick, you can also try mixing about a cup of bleach for each gallon of water and using this as your mold-killing spray solution.
Apply a Mild Dish Soap
Dish soap should be applied directly to what remains of the stain, and then left to sit for 10-15 minutes before it's hosed off. For tougher stains, a plastic bristle brush may be needed to lift the stain from the patio.