In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood.
Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
In most scenarios, refinishing rather than replacing your hardwood floor is the ideal outcome. While refinishing hardwood can be a long and tedious process, it is much more cost-effective than a total replacement. During the refinishing process, all furniture will have to be removed from the room.
Expense. Price is usually the first thing people consider when it comes to refinishing or replacing a hardwood floor. The truth is, it is almost always cheaper to refinish your floor than to replace it.
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Besides, a properly maintained wood floor can go 20 or 30 years or more before needing to be refinished, says Lupresto. And it can be sanded and refinished "easily six or seven times" over its lifetime, he says.
Takeaway: Your worn down pre-finished hardwood flooring can be refinished up to 5 times. You can change the color of the entire floor each time that it's completely refinished. Leave the bevel in the floor and DO NOT have the bevel filled. Pre-finished hardwoods show scratches more than site-finished hardwoods.
A quality hardwood floor can be sanded down and refinished at least six times, and up to ten times before you need to replace it. You can change the color, closely match and replace warped, stained, or termite ingested planks, silence squeaky boards, and fill gaps or patch knots.
Installing hardwood flooring averages between $6 and $12 per square foot. Wood flooring costs $3 and $7 per square foot for materials and about $3 to $5 per square foot in labor to install.
Hardwood floors are one of the best flooring options for homeowners looking to increase the resale value of their home, with hardwood typically yielding around a 75% return on investment.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
Depending on a floor's thickness and the experience of the flooring professional, a floor can be sanded around 4-6 times in its entire life. Hardwood floors can be refinished every 7-10 years, making the 4-6 refinishes more than enough.
So is it possible to pull up hardwood floors and reinstall them? Yes, this is definitely possible. Since they are environment-friendly and extremely durable, hardwood floors are often reused when remodeling or building a home. They also offer better aesthetics and lower costs than buying new materials.
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It's commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
What's the Difference Between Pre-finished & Unfinished? The difference between prefinished and unfinished floors is in the name. Prefinished floors are finished before installation, while unfinished floors must be finished after installation.
Sanding wood floors that are too thin can lead to splintering and other types of damage. Since most hardwood planks are manufactured with tongue and groove to interlock, it is necessary to leave at least 1/8 of an inch of wood at the top of the board, above the tongue and groove, for a complete refinish.
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it's often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
Your beloved hardwood floors' aesthetic can be easily upended by a rogue board with water damage, cracks, or grooves. But try not to fret—you can replace individual wood planks on your own without having to replace the entire floor.
Unless your floors are very old and thin or have structural or water damage, chances are they can be saved. If you want a new or exotic type of wood or are unhappy with the current pattern or thickness of your floorboards, you may want to consider replacing them.
Refinishing Prefinished and Laminated Hardwood Floors
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it's difficult or even impossible to sand prefinished or laminated wood floors.
For example if you have a painted finish on your wooden floor then stripping will likely be more effective, however if you want to remove a basic polyurethane finish and you need to do so during the colder months of the year then sanding will be more appropriate.