Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
From the manufacturer. With professional strength, the gel blasts through and starts dissolving tough hair clogs on contact. Wait for 15-30 minutes then use a blast of hot water. Doesn't damage pipes or plumbing.
Drano is a corrosive. It eats away at grease build ups in you pipes. But as a corrosive it can , And does also eat away at your pipes. Using it once every few months is not too bad But using it often will create issues with your pipes.
Corrosion
The chemicals in the product are designed to break own the clog, but if left for too long, they can start to break down the pipes themselves. This can lead to cracks and leaks in the pipes, leading to various issues, including water damage and flooding.
Using Drano once or twice is nothing to be too concerned about, and it likely won't cause damage to your pipes.
Bottom line: Liquid Plumr and Drano should be used sparingly, if ever. That said, using a chemical drain cleaner once or twice probably won't result in significant damage, but you are taking a risk every time you use one.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Single Use, Not Frequent Use
Because of the chemicals found in these types of products, you could cause irreparable damage to your pipes. In most cases, a single use of Liquid-Plumr or Drano will not cause any issues with your pipes, though you should avoid using them in your toilet.
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. Make sure that you get a plunger that can seal all the way around your drain.
Deploy Drano. Does this particular clog seem bust-up proof? If standing water remains, use Drano® Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.
For use on clogged or slow-running drains, pour half of the bottle (32 oz. size) slowly over drain. For extremely slow-running drains or complete clogs, pour in entire contents of 32 oz. bottle.
Clogs can also be caused by buildup in the third, lateral section of the pipe. Drano® Max Gel Clog Remover is effective on these clog types as well. Keep some on hand for its reliable clog-busting power!
The best way to clear that clog is by pouring Drano® Max Gel Clog Remover straight over the drain (even if there's standing water). It works by dissolving the remaining hair and gunk—and boom! It works within minutes, and keeps your drain flowing smoothly!
A common cause for clogs, especially in kitchen drains, is a buildup of grease. Soap and hot water can be an effective Drano alternative to dissolve grease blockages. Pour roughly ½ to 1 cup of dish soap down the blocked drain. Following this, pour about a gallon of boiling water, taking care not to burn yourself.
Professional Plumbing Tools 101: Drain Augers
Also known as drain snakes, there are several different versions of drain augers that most plumbers will carry with them at all times. In essence, it's a basic tool, but an auger is best for tough drain clogs that just won't budge and for cleaning out drains, too.
It works great to remove hair, soap scum, and other gunky clogs. Conquer tough clogs whenever they happen.
The chemicals in Drano may not solve all clogs, and they can lead to a worsening of pipe issues. Drano can build up in a clogged area, and corrode the pipe. With repeated use, these chemicals may eat their way through a pipe, and cause a leak or a collapse of the system.
Yes, it is possible for drain cleaners to end up making a clog worse. This can happen for a few reasons. First, the chemicals in drain cleaners can corrode pipes and cause damage over time. This can lead to leaks or even bursting, which can make a clog worse by creating additional blockages.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
Simmons says these products are corrosive to pipes. “If used repeatedly, they can cause your pipes to burst, leaving you with a much larger problem,” she adds. “Don't use Drano or similar products. Call your landlord or super.”
The harmful chemicals in Drano can end up being corrosive to your pipes. Drano has been known to cause toilet bowls to crack, soften and break PVC pipes and break older corroded pipes. Over time, the continued usage of Drano can lead your pipes to corrode, crack and eventually fail.
Unfortunately, the pressure from a plunger probably won't break up a shower drain clog. Instead, it will only send the material deeper down the drain pipe completely intact. The clog still exists, but now it's even deeper into your plumbing system, causing your shower to drain slowly or not drain at all.