Interior NATURE STONE® Brand Flooring such as basements may be cleaned by sweeping, washing, hosing, vacuuming, wet-dry shop vacuuming, floor scrubbing, deep extraction cleaning, or utilizing a carpet cleaning machine as necessary.
Use a 1/2 cup of any of the following: ammonia, bleach, or hydrogen peroxide and a gallon of water. Reminder: do not mix bleach and ammonia. On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
If you have natural stone tiles anywhere in your house, avoid cleaning them with vinegar, lemon, or ammonia. The acidity in the products etches and dulls the stone, says Elena Ledoux, owner of Superb Maids in Las Vegas, Nevada. To repair, it will require a very expensive re-polishing process.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
Just use soap, warm water, and a non-abrasive cloth or sponge. Thoroughly scrub the entire surface with soap and water. Rinse the sponge, repeat with a clean, damp sponge to remove soap residue, and then dry with a soft dish or hand towel.
If necessary, work gently using a non-acidic cleaner, such as washing soda, a soft scrubbing brush or mop and clean water, but never soak the floor. ' Whatever you're using, it's important to test clean a small area of stone first. Take particular care if you're going to clean marble.
You should not use Lysol on your granite countertops, backsplashes or vanity tops. The cleaner contains harsh ingredients that can cause your sealer to lose its effectiveness. In specific, scents such as lemon contain citric acid, so you need to keep away from those.
Steam cleaning can cause a condition known as spalling. Since most stone is porous, the high temperature of steam cleaning can cause pressure within the stone, which can lead to pitting and/or flaking of the surface of the stone.
Maintenance and Cleaning of Natural Stone Surfaces
Marble and granite are easier to maintain than you'd expect. Warm soapy water and a soft cloth will clean and shine on both surfaces. You can also clean with a stone specific cleaner formulated to be gentle and effective on stone surfaces.
Vacuum or sweep the floor to remove any dirt particles. Fill a bucket with a gallon of warm water and use just the water or mix in a small amount of Neutral All-Purpose-Cleaner, Dish Soap or the manufacturers recommended cleaning solution. Change the solution when it gets cloudy or dirty.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Topical Sealers are often required if you wish to alter the finish as well as enhancing the color. An example would be adding a sheen or shine to a stone that has a naturally dull or matte finish. This is where a topical sealer may be more suitable.
Buy a polishing powder designed for natural stone countertops. You'll generally have to mix the powder with water to form a paste. Then “polish” problem areas with a soft cloth. Some products require you to leave the paste on overnight (mostly for stain removal).
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
Quartz is an incredible material and easy to clean.
The beauty of natural stone with the durability of a manufactured one. For heavier stains, glass or surface cleaners will do the trick since quartz is non-porous and you don't have to be as finicky with the pH as you would with granite.
Staining agents commonly present in the kitchen, bathroom and other areas where natural stone is used include: Organic materials, such as wine, fruit juice, food scraps, tea/coffee and leaves. Oils, such as cooking oil, cosmetics, grease and oil-based paint. Ink, such as pen or marker.
Magic Erasers are bad for natural stone surfaces
Magic Erasers will damage your natural stone countertop or even your floor. If you have polished marble or granite countertops, or even natural stone tile, don't use a Magic Eraser to clean it, according to Countertop Specialty.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
The safest liquid to try first is water with a little dish soap. Soak your finds in soapy water for a day to loosen any packed-in dirt, and wipe or brush them clean. An abrasive toothpaste can also dislodge grime from smaller surfaces. Many collectors choose to remove calcite from rock and mineral specimens.