Once you've gotten used to your power washer and made sure that the settings are correct, it's time to begin cleaning off your pavers. You'll want to keep the tip of the wand at least one foot away from the pavers and use broad, sweeping motions so that the water doesn't focus on any one area for too long.
Pressure washing is one of the most effective ways to clean your pavers. However, if not done properly it cause permanent damage and deterioration to the surface. Excessive water pressure may remove dirt and grime build-up but it can also eat away at the material.
3) USE A CLEANER FIRST
I used a bleach-free pressure washer concentrate and sprayed it over each section to help loosen the grime before going at it with a higher pressure nozzle. It didn't take long to apply and helps get those stubborn mildew stains out.
1000 to 1500 psi pressure is easy to mange and will not cause damage to pavers and paving stone. A low pressure washer is also safe for mortared flagstone and slate patios and walls.
White Vinegar and Water: A more natural way to touch-up your concrete pavers or paver stones is to use a mixture of water and white vinegar. Let the vinegar mixture sit on the pavers for about an hour before using soap and water to scrub away any stains.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Most contractors and manufacturers recommend sealing pavers for the many benefits. Both concrete and brick pavers are porous materials that can change quality and appearance when they absorb liquids.
A solution of household bleach diluted 10:1 with water (10 parts water) can be used to remove many types of stains. Some of these include beverage stains, leaf, wood rot, and tobacco stains. Always test a small section of your patio before covering a large area.
After the concrete has dried for at least 24 hours, you can effectively apply a concrete sealer. A sealer helps prevent future stains and potential damage from products like ice salts.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
If the pavers are wet due to a pressure wash, allow them at least 24 hours to air dry. They may need a reseal after a deep clean, which is crucial to wash away residue. Excessive moisture from intense heat can also hinder the sealing process.
Applying a degreaser will loosen stains in the concrete, allowing you to pressure wash them away. Some pressure washers have an attachment tool for applying degreaser. Otherwise, scrub the degreaser into the concrete with a stiff-bristled brush or push broom.
Pour the sealer into a paint roller tin and use a long roller brush to apply the sealer onto the paver surface. Make sure you're working in sections that'll keep you from getting trapped in a corner. Follow the sealant instructions on how much drying time to allow after the first coat then apply the second coat.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
After you have invested in pavers, whether that be a patio, poolside deck, etc., it is important to seal your pavers in order to protect from the weathering UV rays. These rays, which are known to impact the skin negatively, also impact the surface of your pavers negatively.
Once the pressure washing is complete, it is important to wait until the surface is completely dry before applying any sealant. Depending on temperature and humidity levels, this process can take anywhere from 24-48 hours.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
Specially designed narrow-bladed weeding tools – sometimes called 'dandelion weeders' – for tackling such weeds are the most effective. More generally, a 'block paving knife' can be run along between pavers to sever most weeds. A wire-bristled 'block paving brush' is good at removing moss and the smaller weeds.