Dawn dish soap and vinegar – Mix equal parts of vinegar and blue Dawn dish soap into a spray bottle. Run the shower for a few minutes on hot to heat up the shower space. Spray to coat the surface of the shower walls evenly with the mixture. Let sit for 5 minutes then use a damp cleaning rag to wipe away.
Spray all over the tub and shower and let it sit for a few minutes to a few hours, depending how challenging the job is. Scrub if you need to, but the scum should rub right off. Don't worry about the strong vinegar smell. You will be pleasantly surprised it smells more like Dawn than vinegar!
The combination of dish soap and vinegar is highly effective for a few different reasons. They're both excellent at breaking down tough grease and grime, but vinegar alone will simply run off of most surfaces, and dish soap is too thick to use on its own.
Simply mix equal amounts of white vinegar and Dawn dish soap in a glass spray bottle, give it a good shake, and you're done! Optionally, you can heat the vinegar in the microwave or on the stove until it's warm before adding it to the dish soap.
To make the best homemade shower cleaner, just combine equal amounts of Dawn dish soap and white vinegar in a spray bottle and gently shake mix. Spray down your shower with it, wait half an hour, then rinse clean!
You can use baking soda and water, or use washing soda with hydrogen peroxide. Some people find it easier to use a toothbrush to apply solutions on the grout before scrubbing them off. This will allow you to reach all the necessary spots and clean your shower walls thoroughly.
While the complete “recipe” is inaccessible for the masses, a Dawn spokeswoman has pointed the magic to uniquely powerful surfuctants—or, the chemical compounds that reduce the surface tension of a liquid when it's dissolved, aka the stuff that cuts the grease.
The toughest jobs call for even tougher cleaning products: disinfecting cleaners, vinegar, sometimes even bleach. But if have persistent stains and want to remove the soap scum, add one more product to your cleaning caddy: Dawn dish soap.
Dawn and Vinegar Grout Cleaner
Heat a cup of 1-to-1 vinegar and water in the microwave for about a minute. Pour it into a spray bottle and add a cup of Dawn dish soap. Carefully spray the mixture on your grout lines. Let it sit for 5-10 minutes longer if you have really dirty grout.
Because dish soap is meant to break up oils and lift grease and grime from your flatware and utensils, there's no reason why it shouldn't work on the oily soap and human grease build-up accumulating in your tub or shower!
Spray on your tub and shower walls, allowing it to sit for a few minutes before rinsing away. This will even take care of the bathtub ring. Let it sit on your shower floor overnight and scrub the gunk away in the morning. Pour a cup of Dawn liquid dish detergent into the toilet bowl and let it sit for 15 minutes.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too. Always make sure to test new cleaning products on inconspicuous areas of surfaces first.
Let the vinegar solution sit for up to an hour. Then, use a cloth, sponge, or old toothbrush to rub the mess off of the fiberglass tub. Rinse and enjoy!
Most of the time, a mixture of vinegar and water in a 50/50 solution will suffice, but not always. Shower heads only require white vinegar, add sprinkles of baking soda when cleaning a toilet or a bath, water it down to clean tiles.
Start by removing shampoos, conditioners, and the like. Then spray your all-purpose cleaner on all surfaces and let it sit. Wipe down the items you removed from the shower. Once done, begin scrubbing the shower with the microfiber, working your way around until all surfaces are clean.
If your shower has not been used for a week or more, run water from both hot and cold supplies through the shower hose and showerhead for two minutes. To ensure no spray escapes from the showerhead, run it through a bucket of water or full bath.
How do professionals clean showers? Professionals use acid-based cleaning solutions like vinegar for hard water spots and soap scum. For deep-set soap scum, cleaners will use heavy-duty detergents and degreasers. Bleach cleaning solutions are best reserved for cleaning the mold and mildew from grout.
The Rejuvenate No Scrub Soap Scum Remover is our top choice for glass shower doors thanks to its bleach-free, fragrance-free, and non-abrasive formula that leaves a streak-free finish and gets rid of soap scum and hard water stains on contact.