Heat one-fourth cup vinegar and pour into a spray bottle. Add one-quarter cup liquid dish detergent, and it give a little shake to distribute. That's it! The vinegar and dish soap work together to tackle soap scum and dirty tub rings.
Mix ½ cup bleach into about a gallon of water. Using a sponge, coat the tub's surface with the bleach and water solution and wait 5 minutes. After 5 minutes, scrub the surface with the sponge, paying special attention to the tougher stains. Rinse the tub with cold water, being careful not to splash the bleach.
Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces. Use the bucket to periodically rinse out the sponge or brush and to transfer soapy water into the tub.
Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse. If necessary, repeat until the stain is gone.
That's right: Grab your dish soap and a broom, and you might be as pleasantly surprised as we were to learn that Dawn is apparently just as effective at banishing bathtub scum as it is at removing all that grime and grease from your dishes and pans. Plus, this technique is equal parts simple and fast!
Pour a generous amount of dish soap into your tub and then start scrubbing with the broom. The stiff plastic bristles will deliver a deep clean, even against tough stains. When you're done, rinse the tub and you're all set.
Spray on your tub and shower walls, allowing it to sit for a few minutes before rinsing away. This will even take care of the bathtub ring. Let it sit on your shower floor overnight and scrub the gunk away in the morning. Pour a cup of Dawn liquid dish detergent into the toilet bowl and let it sit for 15 minutes.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Soap scum and grime can clog your drain and prevent easy drainage, which will then contribute to grime buildup around the edges of your tub where the water rises while you're showering. Prevent clogged drains and avoid pipe problems with our help!
Once a week at least.
Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.
Like magic, the Magic Eraser will start powering through tough grime in just a few swipes. Before you know it, your clean bathtub with shine like the top of Mr. Clean's head! And remember, you can also use Magic Eraser to clean other surfaces too.
But, put simply, there is a secret ingredient. While the complete “recipe” is inaccessible for the masses, a Dawn spokeswoman has pointed the magic to uniquely powerful surfuctants—or, the chemical compounds that reduce the surface tension of a liquid when it's dissolved, aka the stuff that cuts the grease.
Dish soap and vinegar work wonders for that extra smudge-cutting and cleaning mixture. Mix in a spray bottle 1/4 cup of white vinegar with 2 and 1/2 cups of water, plus 1/2 teaspoon of dish soap. Rinse windows and mirrors with clean water to clear off any suds.
Heat vinegar in microwave until hot and pour into squirt bottle. Add the Dawn soap. Put the lid on and gently shake to incorporate. You now have a powerful cleaning product that will melt soap scum and tub and shower buildup, clean sinks, appliances and just about anything.
3. Degrease cabinets. Dawn's grease-cutting power works just as well on cabinets coated in cooking grease as it does on dishes. Just squirt some on a wet sponge, lather up, and wipe the grime away.
Well, Peter Daly, the CEO of Master Plumbers, explained to News.com.au that "it's safest to use cleaning products specifically designed for flush toilets," which means that dish soap isn't ideal.
Diluted bleach is particularly effective at combating mold and mildew growth in your tub. If you have dirty tiles around the tub, ordinary hydrogen peroxide is an effective tile and grout cleaner, and white vinegar is good for cleaning bathtub fixtures. Never use all of these chemicals at once, though.
Fiberglass bathtubs may start to turn a yellowish color as a result of soap scum or hard water. These stains can be very difficult to remove. However, a mixture of cream of tartar and hydrogen peroxide will easily remove any stain and restore the tub to its original white color.