For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to one hour. Use a cloth or sponge to remove the dissolved dirt and soap scum from the tub. Rinse the tub and use a microfiber cloth to remove excess paste or solution.
To begin, start by spraying down the entirety of the shower with the vinegar and water mixture and allowing it to sit for 5-10 minutes. This will help to remove any built-up dirt and grime. Following this step, use a damp cloth to wipe down the shower and make sure to get into any crevices.
If the discoloration is caused by dirt or grime, cleaning the tiles with a pH-neutral cleaner and a soft-bristled brush may be enough to restore their original color. Remove efflorescence: If the discoloration is caused by efflorescence, you can remove it with an acidic cleaner or a solution of water and vinegar.
Try cleaning with vinegar first.
Though it's a mild natural cleanser, vinegar will typically be potent enough to deal with most stains when applied heavily and given time to set up. Spray the tub down thoroughly, let the vinegar sit for a few minutes, then scrub away the stains using a sponge or stiff-bristled brush.
Clean the grime off your tub, shower or tiles
Use Dawn and some hot water and a cloth or sponge to get into those nooks and crannies where grime and scale tend to build up. You can also combine Dawn with vinegar for stronger cleaning power, especially when tackling hard water stains.
Baking soda and hydrogen peroxide are items you can get easily—you may already have them in your home! To make a cleaning paste for your tiles, mix half baking soda and half hydrogen peroxide. Then, put the mixture on the stained tiles and leave it sitting for one hour. After time's up, rinse the tiles.
To make the best homemade shower cleaner, just combine equal amounts of Dawn dish soap and white vinegar in a spray bottle and gently shake mix. Spray down your shower with it, wait half an hour, then rinse clean!
Hard water can also cause buildup in your pipes and unsightly brown or white stains in your shower, sink, and toilet. Want to know if you have hard water? Turn on the sink, gather some soap in your hands, and run your hands under the water. If it lathers easily, you don't have hard water.
Most instances of brown shower water are caused by iron and sediment deposits. of iron, you may notice that your toilets, sinks and clothes develop brown, rust-like stains.
If you have brown or orange slime on your bathroom fixtures, it's likely to be caused by iron bacteria. This is present due to a higher concentration of iron or manganese in your water supply.
It's our favorite bathroom cleaning all-purpose tool. Simply wet the Magic Eraser, wring it out and use it to scrub the surfaces. Mr. Clean Magic Eraser eliminates hard water on shower glass, soap scum on bathtubs, grime on tile and grout and even hairspray and toothpaste residue on counters and sinks.
Hydrogen peroxide does a great job of removing hard water stains and is a less harsh alternative to bleach. Spray a solution made from equal parts hydrogen peroxide and water over your tub and leave it for 20 minutes. Then, scrub any remaining stains with a household sponge.
Our top pick is Clorox Clean-Up Cleaner and Bleach. Clorox Clean-Up Cleaner Spray does an excellent job getting your shower clean. Difficult stains melt away in just about a single swipe, with very little effort. Stains clinging to grout were gone after a pass or two.
Shower refinishing, also referred to as shower reglazing, painting a shower, or shower resurfacing is one of the best options to renew a shower when the shower surface is worn, a color change is desired, or damage is scattered over the entire shower.
The dish-washing liquid, when combined with an equal part of vinegar, is a solution that many pinners praise for taking off soap scum without scrubbing. I don't know what mystical ingredient blue Dawn has hidden inside, but this stuff works. Just spray, wipe, and rinse.
“Of course, vinegar does eliminate some things, but it's important to note it's not a complete solution to disinfectant. It is only 90% effective against bacteria and around 80 percent effective against viruses and mold or mildew. Bleach, however, eliminates 99.9% of bacteria, viruses, and mold or mildew.