Pouring a small amount of lemon or vinegar into your toilet once a month can help prevent the build up of limescale deposits. The acidity of these will help wash away any smaller limescale deposits without the need for intense scrubbing.
Limescale toilet buildup is a result of hard water flowing through the pipes and leaving behind deposits of magnesium and calcium that gradually build up into stains and scaling. You can spot these stains and scaling almost anywhere the hard water flows: around taps, pipes, and toilet bowls.
To help prevent limescale buildup, it is important to descale your appliances on a regular basis. This can be done with a commercial descaling solution or a homemade vinegar and water solution. With a little bit of effort, you can keep your appliances running like new.
If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.
Don't leave CLR for longer than two minutes.
Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.
Permanent Solution: Install a CWS Water Softener
A CWS Water Softener not only protects a home from the damaging effects of hard water but also removes the existing limescale that has been building over the years in the pipework.
LIMESCALE is a common problem for all household taps, but cleaning experts have shared "cost effective" solutions to remove "very stubborn" deposits using only natural ingredients. This includes white vinegar, baking soda and lemon juice.
Limescale is caused by calcium and magnesium being left behind when hard water evaporates. Hard water, which is water that contains a higher mineral content, is the root cause of limescale. When it evaporates from a surface, it leaves behind calcium and magnesium deposits.
Another said a dishwasher tablet removes even stubborn stains, commenting: "Drop a dishwasher tablet in the toilet and leave as long as you can before flushing it removes even thick and stubborn limescale." Cleaning experts at Kitchn also recommend using this kitchen essential to remove limescale from the toilet.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.
Best of all, you probably have everything you need to remove limescale in your home already. The citric acid in lemon or acetic acid in vinegar is your best weapon, ensuring a limescale-free bathroom without the need for abrasive chemicals that can damage the finish on your bathroom fittings.
Two of the most effective substances are lemon juice and ordinary vinegar. Lemon juice is usually the best (and will also leave a lovely smell behind). Stronger pickling vinegar and lime juice are both even more acidic and can be used for really stubborn deposits.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Place the shower head in the container and leave it to soak for 20-30 minutes. Lemon will be stronger and require less time than vinegar. Vinegar may need multiple 30-minute stints of soaking. Remove the shower head and rinse it in water, brushing off any leftover limescale.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
“Most toilet bowl stains appear in hard water areas, so it's important to remember that bleach won't work, and you will need to use an acid-based product such as limescale remover. While bleach doesn't get rid of limescale, it does make it invisible which blends in with the colour of the toilet bowl.
Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
Sinks, Tubs, Porcelain Toilets, and Ceramic Tile
A way to safely and effectively clean these surfaces is to grab mild soap, sponges, towels, white vinegar, and baking soda. In a bowl, combine hot water with a couple of drops of mild soap, and using a sponge or rag, clean the surface.
CLR or Lime Away? An acid-based cleaner is the best way to remove water deposits. Vinegar and lemon juice are two natural alternatives, but they just don't work as quickly and effectively. CLR uses similar ingredients to Lime Away.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush. What is this? If vinegar doesn't work, you can try a commercial toilet cleaner that contains acid.
A frequent cause of smelly drains and dirty toilets are urine sediments. Urine scale occurs as urine particles build up on the porcelain. As hard water evaporates, it leaves behind calcium and magnesium deposits which combine to form limescale.