A small isolation pad made of neoprene rubber under each corner tends to be the best for noise reduction.
Vibration absorbing pads. You can get them cheap on Amazon, and it should help you out. It's a square of dense rubber that you can put under the feet of the washer/dryer that will decouple them from each other. I would also add some under each foot of the bottom unit for best effect. So, eight total pads.
Anti-vibration pads are one of the most useful pieces of equipment for households and industries. These devices dispel vibrations and shocks that are generated by medium and heavy machinery such as washers, dryers and drilling equipment.
Anti-vibration pads and matts are made from rubber specially designed to absorb vibrations. When your washing machine is running, the rubber compresses and absorb the vibrations, which helps to reduce the amount of movement and noise being generated. They're a simple yet effective solution.
Rubber flooring will protect subfloors from abrasion in case a washer is out of balance and shaking violently. A rubber mat for a washing machine will serve to protect the floors from shaking regardless of the reasons. There are many reasons that washers and dryers shake and disturb the subfloor below.
Yes. Quiet washing machines have special motors that are designed to be more efficient.
The shock absorbers are used to center the tub movement while in the spin cycle. These shock absorbers are connected from the washer frame to the outer tub. If the shock absorbers in your front loader become weak the washer will make a loud banging sound during the spinning cycle.
If your washing machine is being excessively noisy during cycles, or if the drum is moving around more than it should, it means your washing machine's bearings have likely gone and need replacing.
DIY repair is possible
You can even do that while it is washing, just follow the manual. Check the rubber door seal and drum: that is the place where coins, bra wires and hair grips are most probably stuck. Check the lint filter: some loose items in the machine can work their way down there.
A noise filter, or a noise suppressor, cuts down the amount of electromagnetic noise that your washer makes. The noise filter is found in the top panel of your washer. If your noise filter is faulty, you may hear a buzzing noise when the washer is running.
Using a rubber mat for washing machine and dryer areas also helps to protect your subfloor. The mat can help to prevent your floor from being scratched or worn by the vibrations of the machines.
The washer pan will catch any leaks due to washing machine overflow or hose failure, or any drips from where the hoses connect to the washing machine. The washing machine pan also protects your floor from condensation.
You can maximize the quiet performance of your washer with a few simple tricks: Place It on a Stable Surface: Setting the washer on a laundry pedestal reduces vibration. Use Anti-Vibration Pads: These pads absorb the shock and movement, keeping noise to a minimum.
Another way to reduce machine noise in an industrial workplace is to fit an acoustic enclosure around each noisy machine. This can provide a high noise reduction, of in the region of 30 dBA, if the acoustic enclosure is well designed and well fitted.
The Everbilt anti-vibration pads are a universal vibration-reduction accessory that fits most brands of washing machines and dryers. They keep your appliance steady and work on any type of floor surface, reducing noise and scratches that result from the vibration of washing machines and dryers.