An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
You don't need a special soap for mopping wood floors: Fill up a bucket with warm water and squeeze in about 1 TBSP of Natural Dish Soap. Pro Tip: Avoid using a soaking wet mop: Wring it out until it's mildly damp.
Floor Mopping
All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
DIY Hardwood Floor Cleaning Solution
In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water. Dip your mop and wring it over the bucket, then gently mop the surface of your floors. Rinse your floors afterward with just water on a damp mop, then wipe up any standing water.
Ammonia. Ammonia is a pungent chemical that has many cleaning uses in your home, but it should never be used on hardwood floors. “The ingredient damages the surface and dissolves the lignin in the wood,” explains Leanne Stapf, chief operating officer at The Cleaning Authority.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Why Are My Hardwood Floors Hazy? The most common causes of a hazy or cloudy film on hardwood floors after cleaning are a buildup of floor cleaner, wax buildup, trapped moisture, and bad floor cleaners. All these can make wood floors appear to have a milky, white substance on top of the surface even after cleaning.
Vegetable Oil & White Vinegar: Mix equal parts vegetable oil and white vinegar together to make a simple, yet effective, cleaner for your hardwood floor. Vinegar is a natural polish that is perfect for cleaning. It's acidity will help break down dirt and grime.
Residues from previously used chemicals, grout & plaster dust, builder's cleaning practices, spills & staining cause streaking. Even after the floor surface is buffed residues can still be lurking in the porous grout lines. When wet, the mop moves across and spreads streaky residue across the surface of the tile again.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Water You Using to Clean Your Floors? You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
Do not wet mop wood flooring.
Damp is good. Dripping wet is bad. If you can ring out the mop or pad, you're working with too much water. Excess water will lead to damage of the floor, and even the subfloor.
You should NOT use vinegar to clean your wood floors regularly. You won't notice any damage right away, but over time, the acidity in the vinegar will break down the floor's finish, allowing water to penetrate and degrade the wood.
Vinegar is an acid and hardwood floors need a pH neutral or close to it cleaner. When mixed with water, the solution's acidity is drastically lowered and it becomes an effective method to wash hardwood floors. The vinegar and water mixture cuts through dirt and grime, leaving a streak-free and naturally clean floor.
Bona's mop distributes cleaning solution more evenly than the Swiffer WetJet. Bona's mop head is significantly wider (15 inches) than Swiffer's (9 inches), which makes it easier to clean large rooms but more difficult to navigate in small spaces. Bona's spray mop comes with a reusable microfiber mop pad.
Ultimately, traditional mops are still the best option for deep cleaning. You can put more pressure on the head, and you can use any cleaning solution (rather than the Swiffer-only options) and as much of it as you need.
You can use shark Steam mop on Wood floors but only if they are sealed! If your floors are not, water from the steamer will be absorbed by the wood and damage your flooring from the inside out. Beside sealed hardwood, Shark steam mop can be used on Bamboo, Marble and Vinyl plank floors as well.
For heavier cleaning and to restore a durable shine, use a regular microfiber mop and gentle cleaner specifically designed for finished wood floors, such as Murphy® Oil Soap.
Do NOT clean your floors with Murphy's Oil Soap, Mop and Glo, Orange Glo, Swiffer Wet Mop, furniture polish such as Pledge, vinegar, ammonia, or any pine cleaners! All of these cleaners, over time, will dull and damage the finish.
The best way to get your floors really shiny is to buff them carefully and thoroughly with a soft microfibre, cotton, or chamois cloth immediately after they have dried. This technique will work really well to shine up tiles, laminate, polished stone, or lino.
Sticky floors occur when you leave behind too much cleaning solution, use the wrong floor cleaner, or not rinsing with clean water after mopping. You can clean the residue off tile and wood floors and then rinse using a clean mop and water. Clean with a steam mop to remove the sticky residue easily.
Mix ½ cup of vinegar with one gallon of hot water to create your mopping solution. Wring out your mop thoroughly so that it is only damp and doesn't saturate wood floors with moisture to avoid damage.