Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period. Also ensure that the heat - off - cool switch is set to the desired run mode.
To cancel or stop the override, simply click the “x” on your thermostat.
Your override feature allows your AC unit to be shut on and off for short periods. It is part of your system's automatic settings. There are many benefits commonly associated with using your AC's override feature.
We recommend overrides to last between 1 - 2 hours. Click "Apply". You will then see a banner showing you how long the override will last, as well as an option to cancel the override in advance.
If running in the program mode set at 65°, and you were cool, and you put your set point at 70°, the thermostat will tell the furnace to engage and run until it reaches 70° or three hours has passed, which ever comes first. This is what is called a temporary override.
To cancel temporary override press the "up arrow" or "down arrow" twice or until hours appear. press and hold the "center square".
Once you have located the reset button, the process to reset thermostat settings is straightforward: Press and Hold: Using a small object, press and hold the reset button. The time you need to hold it can vary, but generally, 5-10 seconds should suffice.
All thermostats can be overridden, so you can have the heating on or off regardless of temperature. But as a way of maintaining a comfortable level of heat whilst staying as efficient as possible, they are invaluable when used correctly.
Setting a temporary override allows you to set a target temperature which will override your current heating program until your next heating period or for a set duration. Cancelling an override will remove any setting already in place on your thermostat.
The easiest way to override recovery mode is to disable it via the thermostat settings. If you don't want to permanently disable recovery mode, just program it to run on certain days. Give it a day or so to allow the system to adapt to the setting.
In AC systems, the air conditioner reset button is on the outside unit's lower edge, typically close to the ground. Some models have the reset button located behind the service panel, which may require tools to remove. Reset buttons are usually red or yellow with a clear “reset” label.
Switch the thermostat to the off position. Locate the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn the breaker back on. Turn your thermostat back on and confirm it has reset properly.
What is The Override Feature on My Air Conditioner? The override feature on your home AC unit is one of the best ways to turn your air conditioning unit on or off for short periods of time. Many air conditioning units have automatic settings, and you can temporarily use “override” to change the setting.
The “Run” setting will undo the hold on the programmable thermostat and return the HVAC to its pre-programmed temperature settings.
There are a number of reasons why your AC unit may stop working unexpectedly, including electrical problems, blockages, thermostat issues, and more. Troubleshooting includes checking your circuit breakers, thermostat settings, and replacing your air filters.
If your thermostat is set to a temperature regulation mode or has an energy-saving program enabled, it might reset to conserve energy.
When your thermostat says "temporary", it means that your thermostat is in a temporary hold. The thermostat will hold the building's HVAC system at the set temperature until the temporary hold period expires of the hold is cancelled. The temperature for the temporary hold can be adjusted.
The “hold” feature will override the current set temperature but won't ruin your preset schedule. To use this feature, press the “hold” button, set your new temperature, and then release the button.
Rebooting a Trane Thermostat: All Models
Once idle, you can start to reset your Trane thermostat by following these instructions: In your circuit breaker, find the switch for your thermostat. Turn the switch off for about 30 seconds. Turn the switch back on.
Override mode allows you to take control of equipment scheduling and manually execute state changes. You can set equipment to override mode via the Scheduler equipment tree.
The Temporary Override message on Trane XL824 indicates that the regular programming has been temporarily adjusted or overridden. This message should automatically disappear after the time set by the technician lapses or until hold is cancelled.
system override by the driver means a situation when the driver provides an input to a control which has priority over the longitudinal or lateral control of the system, while the system is still active.