The SmartThings Hub is a Z-Wave certified central static controller. It can be included in any Z-Wave network and operate with Z-Wave certified devices from other manufacturers.
Will Z-Wave interfere with my Wi-Fi network? No, Z-Wave operates on a different wireless frequency than Wi-Fi. Even though your smart hub will plug into your Wi-Fi router, the hub communicates with other smart devices on a different frequency making interference nonexistent.
If you're looking to get into Z-Wave devices for your smart home you'll need a certified Z-wave hub (officially called a Z-Wave Controller). This device is required to form the heart of your Z-Wave network and allow for connection to your normal home network so your smart phone or computer can talk to your devices.
Samsung SmartThings devices (Outlets and Motion, Multipurpose, Arrival, and Water Leak Sensors) contain ZigBee chips to receive and provide information. Other devices compatible with SmartThings might have either a Z-Wave or ZigBee chip.
The outstanding user oriented APP is the only Smart Home APP available on the market integrates the Z-wave sensor, Z-wave IP gateway,P2P IP camera in the single APP page.
SmartThings and Aeotec Smart Home Hub are compatible with over 5,000 different devices from hundreds of different brands. That includes brands such as Aeotec, Bosch, Bose, GE, Google, Honeywell, IKEA, Lutron, Philips Hue, Ring, Samsung, Sonos, and Yale.
The purpose of a neutral wire is to ensure a more balanced AC load to prevent any voltage spikes from occurring. Although most standard lights can work just fine without a neutral wire, you will find that most in-wall light switches require one.
Most Z-Wave switches require at least 20 Watts on load and need to be connected to resistive load. So make sure there are no transformers along the way (common for low-voltage lighting), and preferable more than a couple of high-quality LED bulbs on the circuit.
Amazon Alexa owners can now add voice control to their Z-Wave devices within their smart home network. The marriage of these two technologies is enabling smart homeowners to control lights, adjust thermostats, change music and unlock doors.
Alexa smart speakers are not directly compatible with Z-Wave. You can add Z-Wave devices to your Alexa system, but only if you also have a separate Z-Wave hub that can integrate with Alexa through Wi-Fi.
The Apple HomeKit certified Z-Wave controller to extend your Smart Home with Z-Wave products. Thinka bridges HomeKit to Z-Wave. The (included) Z-Wave controller is best of breed, with a 700 series chip for better range, Smart Start, provisioning, backup and restore, remote access and remote support.
Z-Wave Has Fewer Congestion Problems
As such, Z-Wave's network has much less congestion, as it operates on a lower radio frequency - 908.42 MHz. Zigbee's frequency is closer to that of Wi-Fi - 2.4ghz - meaning a lot more congestion.
Z-Wave.Me app allows you to control your smart home based on Z-Wave technology. Control light, heating, door locks and monitor smart home sensors from a single app. This app is compatible with Z-Wave.Me controllers RaZberry, Z-Way and Hub version v3.
Z-Wave devices all work together, while there are some versions of Zigbee that don't work with each other. If you choose Zigbee, be sure to only choose devices that use the same version, such as Zigbee 3.0.
That's why all new eero hardware comes equipped with a Thread radio. Thread is the latest generation in a series of low-power wireless protocols like Z-wave, Bluetooth, and Zigbee, but because it uses IPv6 natively, it's more reliable, and employs secure protocols and encryption by default.