Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Dish soap is a great wood cabinet cleaner! It's strong, yet gentle on wood, so it works great with removing grease without affecting the finish. It's important to use only a small amount of vinegar with this method, because vinegar is quite acidic which can cause serious harm to your cabinetry.
Using the spray bottle, measure a 50/50 mix of vinegar and warm water. Spray the solution directly onto the kitchen cupboards and leave for a couple of minutes. Wet the cloth in warm water, then thoroughly rinse the cloth as too much water could damage a wood cabinet.
Mix up a few drops of dish soap (not dishwasher detergent) in a bowl of warm water until soapy. Use a sponge dipped in the solution, but not dripping wet, to gently work the grease and grime out. Follow up with clean water to remove lingering dish soap. Dry the surface thoroughly with a dry microfiber rag.
Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth. Add a few drops of liquid dishwashing detergent to the vinegar and water solution to clean extremely grimy cabinets.
You'll want to get two buckets that are large enough to swish a rag around in the water to shake it of excess dirt, and you'll also want a good natural wood cleaner. Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Dawn® Platinum makes cleaning kitchen cabinets So Dawn Easy! The unique formula quickly breaks down grease particles while staying gentle enough to not cause any damage. Be sure to use a soft cloth or sponge when cleaning.
How do you clean sticky wood cabinets? The sticky residue you feel is the grease particles that float in the air while cooking and then attach to the cabinets. I use Murphy's Oil Soap and a little water. Be careful not to rub too hard or you'll rub off the finish.
Kitchen cabinets that have not adequately dried after cleaning can also become sticky. This is because cabinets are usually made of porous materials that absorb water and cleaning solutions. So, when water and cleaning solutions don't dry properly, they leave behind a sticky residue.
Rub vegetable oil into the sticky residue and leave it to soak for around 2 hours. Use a warm hair dryer to loosen the residue with heat before wiping clean with warm soapy water. Another method uses furniture polish.
You'll find advice online that includes wiping off the sticky stuff with vinegar and water, or using a homemade mix of equal parts turpentine, white vinegar and boiled linseed oil.
While Goo Gone is safe for use on most surfaces, including wood, carpet, glass, fabric, and sealed stone, the manufacturer itself says it should not be used on the following surfaces: Silk. Leather. Suede.
Cooking adds even more grime in the form of food splatters and oil-laden steam. Even if you have a vent hood or use a splatter guard when cooking, oils leave a residue on cabinets. Dust and dirt in the air get stuck in that residue, coating your cabinets with a sticky mess.
The answer to this is quite simple. The sticky gunk is most likely an accumulation of grease, dirt, and grime. However, it may also come from a buildup of waxes or oils from furniture polish.
The sticky residue is usually caused by cooking oil, fat from foods and dirt.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
One critical question when finding an effective hardwood floor cleaner is whether it will leave a residue. When diluted properly, Murphy® Oil Soap Original Formula does not leave a residue.
Mix equal parts white vinegar and warm water in a spray bottle, adding liquid dishwashing detergent to cut through the grease. Spray outside doors and let the solution sit for one to two minutes. Wipe clean with a microfiber cloth. Spray inside doors and shelves and let the solution sit for one to two minutes.
“I wash down my cabinets every two weeks with Pine-Sol to keep the kitchen smelling fresh and get rid of the greasy build-up.”
Power to the Kitchen Cabinets
Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth.
For heavy cleaning, dilute 1/2 cup Murphy per gallon. Clean well with wrung-out mop, and mop any excess water. No visible residue, no rinsing required.
You should absolutely NOT use Murphy's Oil Soap to clean your wood floors!
You can use a Magic Eraser or household baking soda to remove stubborn pen marks, paint splotches, or rock-hard food splatters from wood cabinets. But remember that both are abrasives, so you'll need to work carefully in order to remove only the stain and not the wood finish.