Key codes are found on the side or the bow of the original key that came with your new lock. Some brands do not stamp this code on the side of their keys. If this is the case the only way to get that code is with a key gauge.
You can identity the type of Kwikset lock you have by locating a small vertical slot on the plug. This is located to the left of the cylinder's keyway.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.
On my Aura Deadbolt, what do the different colored lights on the status LED mean? In normal operating mode: Amber indicates locked. Green indicates unlocked. Red indicates low battery.
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system's instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.
Keys are typically printed with an alphanumeric code called a key identification number, a key code or a key number that allows locksmiths and companies to replicate keys without the need to install a whole new lock system.
Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
How Many Guests Can I “Invite” to access my Premis lock? You can invite up to fifteen(15) Apple HomeKit to access your Premis lock through the Home app. You can also provide up to 30 user access codes using the Premis App.
For example, if you want to program User Code 2, press the program button twice. Many Kwikset locks hold 4 User Codes, but some hold as many as 30 at once. The program button is a small black button in the battery compartment of the lock.
On my Smartcode 888, the lock button flashes red with fast beeping sounds for three to four seconds. This is a low battery alert. Please replace you batteries.