How Many Guests Can I “Invite” to access my Premis lock? You can invite up to fifteen(15) Apple HomeKit to access your Premis lock through the Home app. You can also provide up to 30 user access codes using the Premis App.
Make sure the door is open If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and then keypad will flash green. Press 1 to add a permanent user code that can be used for entry at all times, until deleted. Press 7 to add a one-time user code.
To set a code for the second user, press the SmartCode “Program” button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the “Lock” button again.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
Make sure the batteries are installed, and bring the interior assembly next to the controller. Follow your smart home system's instructions to begin pairing at the controller. The lock may need to remain stationary for 60 seconds during pairing.
Some locks are designed to work with two different keys. The change key will open only that specific lock, while the master key will open that lock and several others in a group. In these locks, a few of the pin pairs are separated by a third pin.
A standard 40-digit Master Lock has 64,000 possible combinations that may open the lock.
Kwikset pin and tumbler locks operate by matching the cuts on the keys with the bottom pins inside the cylinder plug. In a 5-pin system, there are two sets of five pins in each lock, top and bottom, and a set of springs. The top pins are all the same size and are flat on both ends.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Press and hold the Reset button for 5 seconds, until you hear 3 long beeps.2. Enter the default Mastercode (O-O-O-0).3. Press the lock button.
Because most of the default code of the keypad door lock are very simple when they are set at the factory, either 00000 or 1234, which can be easily deciphered by strangers, it is very important to change a use code that only you know and is not easy to be guessed by others.
If there is already an account associated with their email address, they will receive an app invitation. Note: Once the invitee has accepted your invitation, they will be able to pair their smartphone with the lock. A maximum of 8 smartphones can be paired to a lock.
What is the Difference Between a Master Code and a Normal User Code? The difference between a master code and a normal user code is that a master code can change itself and also add, edit, or delete normal user codes.