If you're moving the thermostat somewhere close by, it could be easy to move those wires to the new location. If you're moving your thermostat to a different room, however, you'll likely need the aid of a professional HVAC technician.
Moving a Thermostat: If the required wiring exists at the desired location, moving a thermostat may cost as little as $65. However, moving the unit can entail installing new wiring and cutting and patching drywall, so the project can cost up to $450.
Rest assured, relocating a thermostat within your home is entirely possible. Once repositioned correctly, you'll likely notice the temperature control issues cease to exist. If the question “Can I move my thermostat?” has crossed your mind, the answer is yes!
Not always difficult but not always as simple as it could be. Hard to tell what you will run into, such as header plates inside the walls. There is a thermostat by honeywell that would allow you to have a portable sensor (wireless) that you could place in the other room if that sounds like an easier route.
When it comes to thermostat installation and anything else HVAC-related whether it be installations, repairs, or maintenance, it's always best to call a reputable HVAC company like this one here to make sure that the installation would be done properly by a professional and experienced HVAC technician.
If you're moving your thermostat to a different room, however, you'll likely need the aid of a professional HVAC technician. They'll have to run a new set of control wires from your HVAC system to where you'd like your thermostat to be situated.
If however, your desired new thermostat location resides far away in another room distant from existing infrastructure, strongly consider hiring an HVAC technician to safely perform the complex wiring rerouting involved.
So, where should you place the thermostat in your home? Ideally, you should place your thermostat in a room that you use frequently so your thermostat is reading accurate temperatures. You should also place your thermostat on an interior wall that is unobstructed by household items.
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
It can take up to 2 hours. It costs from $100 to $300. To ensure the complete solving of the thermostat problem, replacement is better than repair, as the car gets a new part. It also helps to extend the lifespan of the car's cooling system.
Better yet, install your thermostat at least 1 stud away from the heater. Moving a thermostat out of the same wall cavity as a heater will help performance.
To move your Smart Radiator Thermostats or Wireless Temperature Sensor from one room to another, go to your tado° app and follow the steps below: Go to Settings > Rooms & Devices. Select the device you would like to move.
If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan.
The cost to install a thermostat is $182 on average, but you could pay between $113 and $264. Thermostats play an important role in our daily lives, cooling us down during the sweltering summer heat and keeping us warm and cozy during winter. While the average cost to install a thermostat is $182, pricing can vary.
Overall, the thermostat is seen as a reliable and efficient upgrade for managing home climate. Buy this thermostat! Excellent thermostat!
As with any system, eventually, your thermostat will become outdated. Modern home thermostats tend to have about a 10-year lifespan but are usually replaced sooner due to innovations in the market.
In some cases, you can move your thermostat yourself. But in others, you'll need to call an HVAC specialist. But that cost can potentially be recouped over time through savings. For more money-saving tips, check out how Energy Star appliances can save you cash, and the cheapest place to buy groceries online.
Yes, many smart thermostats are designed for DIY installation, and manufacturers typically provide step-by-step guides and videos. However, if your HVAC system is older or lacks proper wiring (like a C-wire), the installation might become more complex, and you may need professional help.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
come and move a thermostat it will cost between $200-$400 depending on how long the new wire has to be. The normal labor rates vary per region so it is between $75-$90 dollars per hour and it will probably take all of 2 hours to pull a new wire and rewire and mount the thermostat.
Your thermostat should be in an area that your family spends a good amount of time in, and we're guessing your hallway isn't one of those places. This, combined with the fact that hallways can restrict airflow, means that a thermostat in a hallway won't get an accurate reading of your home's temperature.
In the most-used room of your home: The room that is used most often is usually also the warmest room in your home. If you place the Thermostat in a colder room, it would measure a lower temperature and heat your home unnecessarily.
Pros do More
Some of you may be asking, “Why would I call a professional if the installation instructions are right here on the box?” Hiring a professional is ensuring that the job is done right. Also, the electrician will do more than just install the new thermostat, move it to a new location, and/or add new wiring.
In many cases, installing a basic thermostat can be a DIY project for those with some electrical knowledge and experience. However, if the installation involves wiring or electrical systems beyond your expertise, it's best to leave it to a licensed electrician to ensure safety and proper functionality.