Applying polyurethane over the stained surface is the easiest part when it comes to refinishing kitchen cabinets without stripping them. Apply one coat, allow it time to dry, and apply another coat. Repeat this process until you are satisfied with the results. Two or three coats will give you a beautiful finish.
The cost to paint kitchen cabinets is lower than you might think—certainly lower than replacing or even refacing them. On average, homeowners spend $809 to repaint the doors and cabinets in their kitchens, with a typical range of $395 to $1,234.
In A Nutshell
Simply put, refacing kitchen cabinets can be done by the following: Remove the doors and doors of each cabinet. Cover the front edges of the cabinets with peel and stick wood veneer. Hang the new cabinet doors with easy-to-install cup hinges.
Cabinet refacing is the process of replacing cabinet skin panels to give your kitchen a dramatic new look. Your cabinets may be scratched or cracked, or you may simply desire a change — much like replacing a perfectly good smartphone with the latest model.
Use lighter colors. A light color on the walls and cabinets instantly brightens a space making it look larger and in turn, more expensive. Light colors reflect light and hide a multitude of sins, including those scratches, dings and dents in your old cabinets.
Temporary cabinet covers
Use contact paper or vinyl to create designs and patterns on your tired cabinets or make them look like a whole new different solid color with a larger piece of contact paper. Just make sure you'll be able to remove whatever product you use without damaging the cabinet material.
Wood cabinets are ideal for painting, but any surface that can be scuffed with sandpaper can be painted. Laminate cabinets require a special bonding primer. The laminate must be in good condition for best results. Choose a high-quality paint.
If you don't clean before sanding, contaminates (like cooking grease) will be pressed down into the wood. Contaminates will keep the soon be applied paint for sticking. You can remove the doors here in the process or wait until after you wash them down. It is totally up to you and situational dependent.
Sanding to repaint or stain cabinets takes a lot of time and energy. Not all staining projects require sanding, especially if you purchase new, already sanded cabinets. However, you can also avoid sanding if you wish to re-stain old cabinets that have no major dents or scratches that need intricate repairs.
Liquid Sandpaper Works Faster
Liquid sandpaper does the work for you in about 15 minutes. All you have to do is apply it, wait 15 minutes, and wipe off any residue once it dry. Any varnish or glossy finish will have magically peeled away and you'll be left with wood that's ready for paint or primer.
Sanding is usually better than stripping. To begin with, stripping is a lot more work than stripping with a paint-and-varnish remover, except in cases where the old finish has flaking off. You must sand through this coloring all the way to get an even color for refinishing once you have cut through it.
What is the difference? As mentioned above, when you are refacing your cabinets, you are putting new material on top of the existing cabinet frames and replacing doors and drawer fronts. When refinishing cabinets, all you are doing is changing the finish, or color, of the existing materials.
REFINISHING IS MUCH CHEAPER THAN REPLACING OR RESURFACING
But, you'd be surprised how little you'll save when you choose to reface your cabinets instead. You might only save around 30%-50% of the cost of complete replacement by choosing to reface them.
Refacing is a word that is interchangeable with the term resurfacing, especially when it comes to cabinet makers and professional remodelers. It simply means that the face, meaning the front or visible surfaces are getting a facelift. So in essence, they mean the same thing.
PVC is one of the cheapest materials you can use for cabinet refinishing. It is not only inexpensive to acquire, but the installation is also less complicated. The process requires little labor, which cuts down the expenditure further. Unlike wood, they are resistant to moisture, rotting, and termites.