Method 1: How to Make Grout White Again with Baking Soda, Ammonia and Vinegar. Fill a bucket with 7 cups warm water, 1/2 cup baking soda, 1/3 cup ammonia, and 1/4 cup vinegar. Stir to combine. Dip a sponge into the mixture or pour some into a spray bottle.
Similarly, vinegar, baking soda, oxygen bleach and other homemade or DIY solutions will not only ruin your grout, they may even damage your tile. Don't take that chance. Instead, reach for a specially formulated grout cleaner that can handle both traditional white tile grout and colored grout.
Apply liberally, let sit for 10 minutes, scrub with a sponge, and rinse with a damp cloth. Spray directly on soap scum, wait 10 minutes, scrub with a brush, and rinse off. Soak a cloth in the solution, wrap around the fixture for 15 minutes, then rinse and dry.
If you prefer cleaning grout with a DIY mixture, make a paste of 3/4-cup baking soda, 1/4-cup hydrogen peroxide and 1 tablespoon of mild dish soap.
Believe it or not, Peterson says that a lot of professionals use a homemade mixture that consists of one cup of baking soda and one cup of hydrogen peroxide. "This simple and cost-effective method truly does the trick on tile grout," she says.
Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. Always refer to packaging for directions. MIX Fill to line 4 per gallon of water. For some surfaces, like grout, a more concentrated solution/paste may be needed.
Specialized Tools and Techniques: To keep shower glass clean, hotels use soft cloths to dry the glass after each cleaning session, preventing water spots. For tougher grime, a mixture of liquid dish soap and baking soda can be applied, especially in the shower door tracks, where buildup is common.
Why It Works. “Dish soap serves as a lubricant for clogs and helps them slide through the pipes,” explains Justin Cornforth, an experienced plumber and CEO at Ace Plumbing.
Mixing vinegar and baking soda causes an immediate chemical reaction. This reaction forms water, sodium acetate (a salt) and carbon dioxide – the fizzy part. The amount of carbon dioxide gas that is produced from baking soda is remarkable – one tablespoon (around 18 grams) can release over five litres of gas!
Different ways to remove grout haze
If this does not work completely, use a mixture of 50% water and 50% vinegar. The acid dissolves the lime residues that make up a grout haze. Special grout haze removers, which you can buy in the tile shop or hardware store, work on the same principle.
Some professionals swear by a simple mixture of baking soda and peroxide to clean grout. Hydrogen peroxide is an acid, and baking soda is a base compound. Mixing the two together creates a reaction that can penetrate the grout lines and free dirt and debris.
The dishwasher tablet will start to dissolve the limescale and you can continue until all marks have disappeared. It's a lucky coincidence that smol dishwasher tablets are designed to tackle hard water marks so the limescale deposits in your toilet bowl are completely fair game.
Baking soda, borax and tea tree oil combine to make a heavy-duty toilet bowl cleaner. Baking soda, borax and tea tree oil combine to make a heavy-duty toilet bowl cleaner.
Simply wipe your Magic Eraser firmly across the glass shower doors with a firm, steady swipe. All it takes is a few wipes to break through soap scum and hard water. Your doors will go from grimy to shiny in no time at all.
Yet, hydrogen peroxide is one of the best shower cleaners used by professionals. All you need is a toothbrush and a bottle of hydrogen peroxide. Before using any chemicals, scrub the grout with water to dislodge loose debris. Rinse thoroughly, and then go in with the hydrogen peroxide.
Mix 3.5 cups hot water, 3 tbsp of lemon juice, 1/2 cup Baking Soda, and 1/6 cup white vinegar. Using a spray bottle, apply the mixture along the grout itself, making sure it's totally saturated. Let it soak in. After about one hour, spray the grout one more time and then mop it all away!
Arguably the most common homemade grout cleaner, a mixture of baking soda, hydrogen peroxide, and dish soap works best for kitchen and shower tile since the paste is easy to rinse out.
Grout pens are designed to cover old grout and fill in gaps between tiles, meaning they are an easy and effective way of refreshing bathroom or kitchen tiles.