Solid blue means you are being watched. When the camera detects motion and record by it self it does not show the blue light.
Solid blue light: A solid blue light means that the camera is starting up and/or recording. Slow blinking blue light: If the blue LED lights blink slowly, then that shows the camera is in setup mode. Blue light blinks on and off, then is on for two seconds: This means that a firmware update is in progress.
Comments Section Ring assumes that if live view is engaged, that a human is actually watching, so it doesn't need to send a notification. Same applies for doorbells. If you have live view engaged on a doorbell and someone pushes the button, it will not alert anyone of the doorbell push.
If you are using SpotCam Ring series camera, the blue bar means someone is watching the camera video on demand at that time, green bar indicates the time when someone presses the doorbell, and orange bar means the battery case of doorbell camera was removed at that time.
Does the blue light on the camera mean someone is watching? No, the most common use case for a blue light on a camera is to indicate normal operation. Besides signaling the normal working of a camera, blue light can also signal perfect network connection or active monitoring.
Solid blue means you are being watched. When the camera detects motion and record by it self it does not show the blue light.
Most phones come with an LED indicator that alerts the user when their camera is in use. If someone is watching you through your phone camera, the light may remain on even after you exit apps that use your camera, or the light may turn on unexpectedly.
The LED light on the front of your Ring Video Doorbell Pro or Ring Wired Video Doorbell Pro (formerly Video Doorbell Pro 2) indicates the status of your doorbell. A solid white light means it's either in idle mode or recording.
The color may vary, but it always indicates that Live View is active. If you don't see the light, check your app or settings to confirm the Live View connection. For more insights on Ring camera features, head over to Home Tech Nerves. This helpful lighting feature lets you monitor your home with confidence!
The blue light will remain on.
With 24/7 Recording turned on, the blue indicator light on your Ring camera will stay on without interruption because your camera is recording continuously.
The red light serves as a warning that your camera might not be functioning properly and may require troubleshooting. One of the most common reasons for a solid red light on a Ring camera is a problem with the power supply.
If you unmute your microphone to speak, this audio will be recorded. With Audio Streaming and Recording turned off, you can override the setting to speak with visitors and record your conversations if you have one of these devices: Video Doorbell (2nd Generation) Ring Battery Doorbell Plus.
Spotting unfamiliar vehicles repeatedly parked or idling near your home can be a sign of robbers casing the area. Pay attention to vehicles that are out of place, especially if they contain occupants who seem to be watching or taking notes. Note the make, model, color, and license plate number.
Can you tell if someone is watching you on Ring? If you see the infrared light turn on at night while the security camera is in Disarm Mode, someone else may be viewing your live feed. Change your router's password and ensure that video encryption is enabled on your Ring Camera.
Your Ring Doorbell will flash blue when charging, rebooting, or accessing the internet. A newly installed Ring Video Doorbell Pro & Pro 2 will flash blue as it charges as soon as you install it.
Turning lights ON or OFF for cameras while using Live View
Open the Ring app to the main dashboard. Tap on the camera preview tile. Tap the light icon at the bottom of your screen to turn on or turn off.
Successful Setup: When initially setting up your Ring camera, a solid blue light will illuminate after a successful configuration. This indicates that the camera has established a strong connection with your Wi-Fi network and is ready for use. It assures users that their camera is functioning correctly.
In a normal state, a blinking or flashing blue light indicates that the Outdoor Camera is sending data, specifically actively livestreaming or recording to your timeline. In very rare instances the Outdoor Camera may become unresponsive after reconnecting its power cable or recharging the battery.
Check the area around your light. There may be something triggering its motion sensors. Check your motion sensitivity controls in the Ring app. They may be set too high for your layout.
No blue light = not recording. Period. Do know red light = infrared (this comes on at night ONLY or in low light). This is NOT about recording and simply what mode the camera is on.
If you've just installed your Ring Video Doorbell Pro and now there's a flashing blue circle on the front of the device, it is not yet fully charged. Once the internal power cell is fully charged, the blue circle will stop flashing and the device will move into setup mode.
Cameras also have a status indicator in Command to show the camera's status at a glance: Orange status indicator: Camera is offline. Blue status indicator: Camera is updating firmware. Green status indicator: Camera is online.
A solid red light on a Ring indoor camera generally suggests a power or connectivity issue. When the camera is initially plugged in or powered on, it undergoes a boot-up sequence where it performs system checks and connects to the Wi-Fi network. During this process, a solid red light may appear temporarily.