At Stanley Steemer, we use a process called
Stanley Steemer does NOT use steam, it uses ``hot water extraction''.
The method we use for carpet cleaning is hot water extraction, commonly referred to as steam cleaning. Stanley Steemer's exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers.
Steam cleaning, or hot-water extraction, has become the preferred method of cleaning for professionals. Steam cleaning doesn't use harsh or sticky detergents and doesn't require agitation of carpet fibers with rough brushes.
We use our patented carpet cleaning machines to deep clean. These machines pump hot water into your carpet to release any dirt deep within the fibers, then extract the water and remove the dirt.
While steam cleaning uses hotter water that transitions into steam, this can actually set some stains deeper into the carpet instead of removing them. On the other hand, hot water extraction utilizes less intense heat that, combined with a cleaning solution, flushes the carpet fibers more thoroughly.
Hygiene. Many steam mop manufacturers claim that the heat of the steam is able to kill bacteria on the floor, saying that it's a faster and more sanitary way to clean when compared with sloshing a regular mop head around on your kitchen floor.
On average, professional carpet cleaning costs $150-$200, says David Steckel, home care expert at Thumbtack. “Carpet cleaning services may charge anywhere from $89-$109 on the low end and $300-$400 on the high end,” Steckel says.
When the carpets are steam cleaned, the dust mites get killed and all the dirt is broken down. This happens due to the heat and the tiny pieces of dirt particles still remain there. To remove the dirt from the carpets after the steam cleaning you have to wipe it out with a broom, cloth or vacuum cleaner.
One factor that greatly impacts the cost of a professional cleaning is the specialized equipment and products being used during the process. These tools are more advanced than your average household vacuum or floor mop—here are some ways they differ: Degree of Cleaning: Professional cleaning processes may vary (ie.
Mix a cup of vinegar (white) with a gallon of warm water. Put the solution in a spray bottle and generously spray it on the carpet. Allow a few minutes to sit to break down the stains, grease, dirt, and dust. Steam clean before the pretreatment solution dries.
The benefits: Hot water extraction, also known as steam cleaning, is the most effective carpet cleaning method for reaching the deepest parts of your carpeting. Dry chem cleaning only reaches the surface of the carpet, whereas steam cleaning penetrates to the deepest layers of your carpeting.
#1 – Highly Effective & Sanitary. Not only does steam cleaning dislodge grime, but the high temperatures involved also sanitize the area from harmful bacteria and viruses – up to a whopping 99.99% of germs.
Stanley Steemer Odor Out Plus neutralizes offensive odors on contact, and then uses natural bacterial enzymes to eliminate the source.
Dry cleaning (some water is used though less than in steam cleaning), is what the standard refers to as a 'surface cleaning'. It's handy for areas that receive a lot of traffic and need a fast drying time. Dry cleaning can be used as a maintenance clean, but steam cleaning is best as your full clean.
To clean a 2,000-square-foot house, you should charge between $250 to $500. The amount you need to charge depends on several factors like how many rooms, cleaning frequency, the amount of work it will take, and whether they want a standard house cleaning service or a deep cleaning.
It is recommended that you try to stay off the freshly cleaned carpets until they are dry – about 6 hours. If you MUST walk over your damp carpet before it is dry use EXTREME caution. Where you transition from carpet to another hard surface, like tile or hardwood, can be very slippery.
Honestly, steam cleaning is the preferred method for most residential and commercial “wall-to-wall” carpet. There's always exceptions, but this is is the method that is the most effective.
So, why does carpet smell after carpet cleaning? Excess moisture causes mildew and mold growth in a carpet, resulting in a musty smell after cleaning. Wrong choice of tools and persistent stains may also leave a mildew smell on carpets after cleaning.
At Stanley Steemer, we use a process called hot water extraction to clean your home. This is often referred to as steam cleaning because of the steam you see as we clean, but we don't actually use steam to clean.
Certain softer surfaces, such as synthetic fabrics, velvet or other delicate surfaces are also not recommended for steam cleaning. Other surfaces such as laminate floor and some plastics could potentially be damaged by the high temperature of steam.