Shock does not contain any cyanuric acid, so after 24 hours, the elevated amounts of chlorine are no longer in the pool. as 90 percent of the chlorine in the water in two hours.
2. Dichloroisocyanuric Acid: Also known as “dichlor,” this is another type of chlorine shock. Dichlor contains both chlorine and cyanuric acid and will, over time, raise your cyanuric acid levels.
Does Pool Shock Contain Cyanuric Acid? Some pool shock, like dichlor shock, contains cyanuric acid. But we recommend using unstabilized chlorine shock without CYA. This ensures you're not adding unnecessary CYA to your water each time you shock your pool.
Clorox has absolutely NO Cyanuric Acid (CYA) in it nor does it increase CYA at all when you use it. You should show them. It's mostly water, then sodium hypochlorite (i.e. chlorine), and sodium chloride salt, and then a small amount of sodium hydroxide and a very small amount of sodium polyacrylate.
1. Liquid Chlorine. Regular bleach, or sodium hypochlorite – contains no cyanuric acid.
Dichlor and trichlor contain both chlorine and cyanuric acid so it is not necessary to add cyanuric acid to the pool water. Stabilizer (aka cyanuric acid) is also sold at most pool supply stores. Cal-hypo and liquid chlorine do not contain stabilizer.
There are three primary types of chemicals that are used for pool shock purposes, which include calcium hypochlorite, sodium di-chlor, and potassium monopersulfate. Calcium hypochlorite is likely the most effective pool shock available because of how strong the chemical is compared to the two other options.
Areas exposed to high levels of sunlight should maintain 60 – 80 ppm (parts per million). Pools using an ORP Controller (Oxidation Reduction Potential) such as the AutoPilot Total Control, should maintain 30-50 ppm. Indoor pools do not need cyanuric acid, unless it gets periodic exposure to sunlight.
Saltwater pool manufacturers recommend maintaining cyanuric acid levels around 60-80 ppm. This is a bit higher than the 30-50 ppm range recommended for non-saltwater pools. And if you live in an area where your pool gets a lot of direct sunlight, you may even consider bumping your cyanuric acid up to 80-100 ppm.
CYA is a pretty strong acid on its own, so the best way to add it is to dissolve it in a bucket of warm water. Then go all around and pour the solution just inside the edges of the pool. For safety's sake, wear gloves and goggles when you mix it.
Pool stabilizer is also known as pool conditioner, chlorine pool stabilizer, chlorine stabilizer, or Cyanuric Acid. And you can buy this chemical additive as either liquid or granular (powder). It's also included in chlorine tablets or sticks (called trichlor) or shock (called dichlor).
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
Calcium Hypochlorite is the most common, strongest and cheapest pool shock, available in two strengths, Shock and Super Shock. Dichlor is a stabilized granular pool shock, made with stabilizer to protect it from the sun and keep it active longer during the day.
Nevertheless, too much cyanuric acid is bad for your pool water; it'll reduce the chlorine's sanitizing effects. Therefore, you can rest easy using non-chlorine shock because it won't disturb cyanuric acid concentration.
Yes both cyanuric acid and muriatic acid are both acids but they serve different purposes for the pool owner. Cyanuric acid has the chemical formula CNOH, whereas muriatic acid is a diluted form of hydrochloric acid, HCI.
Why You Have Low Cyanuric Acid
The most likely reason is that you've only ever used unstabilized chlorine in your pool. Heads up: Unstabilized chlorine, such as sodium hypochlorite (liquid chlorine), lithium hypochlorite, and calcium hypochlorite, is pure chlorine.
Answer: Cyanuric acid shouldn't be at Zero for an outdoor swimming pool because chlorine will deplete faster in hot and humid weather, leading to cloudy water. If your FC is at normal level of 3ppm, raise Cyanuric acid level to 40 ppm and you will reduce chloramine levels that make your water appear cloudy.
In the pool industry, Cyanuric Acid is known as chlorine stabilizer or pool conditioner. Cyanuric Acid (CYA) is a pool balancing product used to help chlorine last longer. Chlorine, in its natural form, is unstabilized—which means it degrades when exposed to sunlight.
Cyanuric Acid Facts
It serves as a protection shield for chlorine against sunlight. The Sun's ultraviolet rays degrade chlorine very quickly, creating a problem for outdoor pools. Studies show that sunlight can be wipe out chlorine by 75-90% in a matter of two hours.
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
BUT, if you have to shock your pool during the day in broad daylight, you can still swim after adding shock. It's recommended that you wait one hour after adding shock with the filter running, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). Some Clorox products go as high as 8.5%. At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach.
Inorganic and Organic Chlorine
They require the addition of cyanuric acid to be stabilized when used in outdoor pools. These products are recommended for indoor swimming pools. Organic chlorine compounds are products combined with cyanuric acid.
If the stabilizer level is too high in a pool, it will lock the chlorine molecules, rendering them ineffective as a sanitizer. This usually happens as a result of using chlorine tablets that contain cyanuric acid.
There are four main types of pool shock: calcium hypochlorite, sodium hypochlorite, sodium dichloro-s-triazinetrione, and potassium monopersulfate. Calcium hypochlorite is the most commonly used pool shock with a typical chlorine level of between 50 to 80 percent.