Corian Restoration Cost Professional resurfacing or refinishing for Corian countertops costs about $4 to $9 per square foot. Corian is nonporous and a solid surface, so you don't have to seal it. You can buff out scratches, dents, scuffs, and even some burns with sandpaper and epoxy for about $30.
On average, resurfacing or repairing Corian® costs between $200 and $500. You can tackle some repairs yourself by sanding out the affected area and filling it with color-matched epoxy. However, for more extensive damage, it's best to call in a professional countertop resurfacing company near you.
When your Corian countertops start looking like they need a refresh, you have two options: Refinishing them or replacing them. If you have semi-custom cabinets, you need to think more carefully about what you do so you can protect the investment you have made.
The national average countertop refinishing cost ranges from $300 to $500, with most people spending about $400 on professionally applied epoxy coating for 60 sq. ft. of quartz countertops. At the low end, you could spend as little as $150 on painting and sealing 60 sq.
This material is designed to withstand everyday wear and tear and last for decades, usually up to 50 years, without the need for major repair or replacement. However, should it be damaged, the solid surface can be repaired in the event of minor damage.
In terms of durability, Corian tends to be more easily damaged by hot surfaces than natural stone. It's also more prone to scratches than surfaces like quartz and granite.
Corian® Solid Surface is renewable and repairable, meaning they can be fully restored to their original condition if damaged, without having to completely replace the material.
The fact is that countertop refinishing can be a great way to transform the look of your kitchen, bathroom, or bar without breaking the bank. Refinishing can allow you to restore and preserve your current countertops without the mess, hassle, and expense of tearing them out and replacing them.
The modern Miracle Method can cost $500–$650 for a tub or $1,000–$1,200 for a tub and shower.
There are a few cheap ways to redo kitchen countertops. For example, you can paint them, cover them with contact paper, or sand them and stain them with a wood finish. These options are suitable for wood, linoleum, or laminate countertops.
Use a low-speed lambswool polisher and buff the entire surface with Corian polish, car polish or cutting compound, until the gloss is restored. Wash off any residual polish and wipe the countertop dry with a soft cloth.
Remember, if the Corian® color is slightly darker like Cocoa Brown, and the finish looks to dull or blotchy, you may want to sand it up a step or two; and then buff with a gray scotch Brite pad. The extra steps will brighten the color and clear up the finish.
We offer a full sand up and republishing service for your Corian worktops to remove mark, scratches and stubborn stains to bring your worktops back to how they looked when they were first installed.
Corian® is a nonporous surface that won't absorb stains, so you shouldn't try to stain these counters. If you're unhappy with the look of your Corian® countertops, you can try to resurface them by sanding them back to their original shine, or you can paint them to match your kitchen aesthetic.
Corian comes in several finishes, from low-shine to high-gloss. Matte or satin, the least expensive, averages about $30 to $40 per square foot and is often used for lighter-colored surfaces. Semi-gloss and high-gloss are commonly utilized for darker countertop colors, costing, on average, $60 to $80 per square foot.
Rinse thoroughly with clean water and dry the surface. Applying Corian Polish: Apply a small amount of Corian polish to a soft cloth and buff the scratched area using gentle circular motions. This step will restore the shine and finish of the countertop.
“Reglazing” refers to the application of protective coating, while “refinishing” describes the whole process from start to finish. Another term you might come across is “resurfacing.” However, the terms “reglazing” and “refinishing” are often used interchangeably to refer to the same process.
Resurfacing costs can range anywhere between £50 – £100 per m2. The costs of a resurfacing job can vary depending on a wide range of factors so you must speak to a local surfacing contactor for a more accurate quote for your chosen project.
Corian Countertop Repair
The average cost to repair Corian countertops ranges from $150 to $750. Corian is a brand of solid surface countertops, and it is one of the toughest materials for your kitchen.
Countertop resurfacing or refinishing costs $5 to $20 per square foot or $150 to $800 total, depending on the material and method. Countertop repair costs $200 to $800+ and is easier and cheaper than a full replacement. Common projects include repairing cracks or chips and refinishing with epoxy resin.
The average lifespan of refinished countertops is 5-7 years. However, we have seen some homeowners have beautiful looking countertops a full decade after refinishing. It all depends on how much you use your counters and how well you care for them.
Corian and other solid surface materials are generally warranted for 10 years; but in practice, they can easily last 30 years or more.
Once popular in the 1970s, have made a comeback in contemporary interior design. While Corian may not currently be in the spotlight of home design trends, its enduring durability and versatility make it a valuable choice for homeowners looking for a reliable option!
Wipe the countertop surface with the help of an ammonia-based spray cleaner or warm soapy water for minor residue buildups, or with an abrasive cleaner for heavier buildups. This will help to remove minor scratches, scorch marks, and very stubborn stains from the Corian countertop and will revitalize it.