Prime with Rust-Oleum Surface Primer (or Rust-Oleum Rust Reformer where appropriate). If using Rust-Oleum Universal there is no need to use a primer. Carefully mask any areas of the object not to be painted.
Always use a primer whenever possible before working with enamel paint. Paint that is applied without a primer base is more susceptible to running, cracking and flaking. Some enamel paints have lacquer components blended in, upping the luster and waterproofing of the glossy finish.
Ideal Uses: Metal, Wicker, Concrete, Wood, Vinyl, Laminate, Plastic & Glass. Rust-Oleum® Universal® spray paint is a paint and primer in one that delivers the enduring beauty of handcrafted finishes on any surface.
Primer allows the paint to adhere better by providing a uniform surface, and will help it last longer. It can also seal a porous surface, block out stains from bleeding through the topcoat, prevent rust formation on iron and steel, and prevent tannin bleed on wood.
IME yes. Rustoleum paint seems to adhere better if you use their primer.
Priming metal before painting is almost always recommended, as it will prevent rust from bleeding through the new paint. Primer also helps paint stick to metal. If you couldn't get rid of all the rust in the previous step, coat the metal with a zinc chromate primer that's formulated for coating rust.
Maximize the rust protection on your indoor/outdoor metal projects by beginning with Rust-Oleum® Stop Rust® Clean Metal Primer. Apply directly over bare, lightly rusted or previously painted metal to ensure the best-possible durability and corrosion protection.
Start with Painter's Touch® 2X Ultra Cover® Primer for long-lasting quality and even better coverage. This spray primer forms a tight bond to surfaces so your topcoat goes on smoother and lasts even longer.
If the paint does NOT come off, it is oil-based paint and you will need to prime the surface with a bonding primer before applying latex paint. The primer can be latex, but it has to be a product that is made to prepare the surface and help with adhesion and that says “bonding” on the label.
Rust-Oleum 3800 System DTM Acrylic Enamel Paint is a fast-drying, water-based metal coating for indoor or outdoor applications. The direct-to-metal (DTM) coating delivers excellent corrosion resistance and protects surfaces exposed to mild to moderate environments.
Apply 2-3 coats allowing 5-10 minutes of dry time between coats. For best results allow Primer to dry for 1 hour before dry sanding. Test in an inconspicuous area to be sure Primer is dry enough for sanding.
Before applying enamel paint on metal, you need to coat the surface with a good quality primer. This unique product will ensure that the topcoat can smoothly be applied on the surface. Choose the shade of the primer according to the colour you have chosen for your metal surface.
You can paint enamel over enamel paint without priming the surface prior to the process. Clean and sand the surface to remove any imperfections and to remove the gloss layer, and you're ready to paint over it.
There are a few different types of paint that can be used over enamel. The most common type of paint to use is acrylic, but other types of paint, such as latex or oil-based paints, can also be used.
Can I Use Acrylic Paint Over Rustoleum Spray Paint? Yes, you can, as long as it's latex or water-based Rust-Oleum. This is because acrylic is water-based, so it's more likely to stick to water-based paint. If your Rust-Oleum spray paint is oil-based, then you need to sand the surface before applying acrylic paint.
Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 15 minutes, to handle in 1-2 hours and is fully dry in 24 hours. Primers can be topcoated immediately.
Rust-Oleum® Rusty Metal Auto Primer is designed to prepare the surface of heavily rusted metal for application of automotive lacquers and enamels. Rusty Metal Primer provides excellent rust prevention when top coated with lacquers or automotive enamels. For best results, top coat with Rust-Oleum Auto Paint.
Paint can be applied to metal or wood and finishes match bright, original equipment colors. Rust-Oleum Specialty Farm and Implement offers superior rust protection for tractors, trailers, lawn mowers and other farm implements.
DPLF and DPLV Epoxy primers - the most popular direct to metal products, these primers provide excellent adhesion and corrosion protection. They can also be used as a sealer and topcoated with many types of refinish topcoats.
DRY & RECOAT
When dry, the surface can be immediately recoated, top coated or wet sanded. For best results, allow Filler Primer to dry for 1 hour before dry sanding. Test in an inconspicuous area to be sure Primer is dry enough for sanding. Block sand the area using 320-400 grit sandpaper.
DRY & RECOAT
Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 15-30 minutes and dries to handle in 1-2 hours and is fully dry in 48 hours. Apply a second coat or top coat within 1 hour or after 48 hours.