A typical AC fan motor uses about 500 watts when it's running. Therefore, if you run the fan continuously for a 30-day month (720 hours), you would use 360,000 watt hours (720 x 500) or 360 kilowatt hours (kWh). Therefore, the fan uses about 360 kWh per month in the ON mode.
No, the fan mode on your AC does not use a lot of electricity. It is more energy-efficient than the cooling mode because the compressor is off, and only the fan is running. This helps in saving electricity and lowering energy bills while still maintaining airflow in the room.
Cons to Keeping Fan Continuously Running:
It could cost you hundreds of dollars a year. The average unit has a 500 watt fan, which uses almost as much energy over the course of the year as a refrigerator, resulting in a $50/month bill.
When the California summer heat rolls in, pairing your AC with a ceiling fan is your best defense. By correctly setting the fan's direction, adjusting the thermostat, and a few other simple strategies, you can keep your home cool without driving up your energy bill.
The central downside of running your fan continuously is the potential for a rising energy bill each month. Running the fan constantly uses a bit more energy, as you might expect, and this can increase your utility bill.
This approach can reduce wear and tear on the air conditioning equipment because the fan doesn't have to start and stop as often. Running the fan on the AC all the time also helps maintain a more consistent and even temperature throughout your home because air is constantly circulating, eliminating hot and cold spots.
Cons of Keeping Your Fan On
A running fan uses lots of electricity to cycle. Plus, you'll decrease your AC's efficiency during the hot summer months. Your vents could blow hot air into your home, increasing your unit's regulation cycling. This will also greatly increase your energy bill during hot or cold seasons.
Your air conditioning system is one of the biggest culprits behind skyrocketing electric bills. When your air filter is dirty, refrigerant levels are low, your thermostat is faulty or you lack proper maintenance, your A/C system can end up using a lot more energy than it should.
It only makes you FEEL cooler because it's moving air over your skin, carrying the heat away from your body. This is the wind chill factor you hear on the Weather Channel so often. So it's doing nothing to lower the temperature in your home, meaning your A/C will run just as long whether the fan is on or not.
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months.
The blower fan uses around 500 watts per hour to run. That's a huge difference! This is why running only the fan (regardless of which method you use) to help keep cool can save you significantly on your energy bills. Of course, the fan on its own doesn't have the cooling power of the air conditioner.
A fan's housing will get warm after prolonged use due to the fan's motor generating heat when converting electricity into movement. This heat is why many people think it is unsafe to leave fans running; however, it is normal and will dissipate from the fan's housing and not exceed a safe limit.
Higher energy bills: If you do decide to leave your AC fan running, don't be surprised to encounter higher utility bills. A 500-watt AC fan consumes almost as much energy as a refrigerator. This means you may have to pay an extra $50 a month in energy costs.
What does the fan setting on an air conditioner do? It activates the unit's fan to circulate the existing air in the room without engaging the cooling mechanism. This way, it helps in creating a fresh ambiance without significantly altering the room's temperature or humidity levels.
The biggest determinant in how long you should run your AC is whether your home uses central air or a wall/window unit. In general, wall and window air conditioning units with smaller capacities can typically run for up to eight hours at a time before they need to rest.
EnergySage estimates that a typical window unit costs roughly $320 (CAD 428) per year to run in areas with a 5-month hot season. Therefore, running a window AC will likely add around $27 (CAD 36) on average to your monthly energy bill.
The fan will constantly blow air into your room if you have the thermostat turned “ON.” If it is on “AUTO,” it will only turn the fan on when heated air needs distribution. So yes, running HVAC continuously throughout the day and night is perfectly safe!
The purpose of the fans on your AC system is to circulate the air throughout the rooms in your home. That means all your rooms stay cool and comfortable, no matter what the conditions outside each of your windows. In most AC systems, the fans will have two settings – Auto and On.
When indoor air temperatures are hotter than about 95 °F: Fan use may cause your body to gain heat instead of lose it. On very hot, humid days, sweat evaporates off the skin slower than normal, and fans make it even more difficult for the body to lose heat by sweating.
On average, an air conditioner costs between $0.06 and $0.88 per hour to use. Let's see how much air-conditioning costs every month (assuming it runs for 8 hours per day). The cheapest option is $14.40 per month and $211.20 per month on the high end.
A typical AC fan motor uses about 500 watts when it's running. Therefore, if you run the fan continuously for a 30-day month (720 hours), you would use 360,000 watt hours (720 x 500) or 360 kilowatt hours (kWh). Therefore, the fan uses about 360 kWh per month in the ON mode.
While it is true that the fan alone uses less energy than the AC, leaving it on will almost certainly result in higher utility bills. Running the fan constantly also increases your system's maintenance needs. That's because the more you run the fan, the faster your filter will get clogged.
If you're running your AC fan 24/7, you should probably stop. You'll usually feel cooler if you let the fan turn off between cooling cycles. Why? Because when the AC finishes a cooling cycle, the unit's fan isn't just circulating air.