Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout.
Although it's possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you'll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. The powder mixes best into warm-to-hot water.
Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots. Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar.
Bleach. If your concrete is dull and sprouting weeds or mold, bleach is your best option for cleaning and brightening concrete. Mix a cup of bleach into a 5-gallon bucket of warm water, then spray or pour over concrete. Rinse thoroughly with water.
For lingering stains, rewet the surface and sprinkle it lightly with Oxiclean. (Or you can make your own oxygen bleach.) This won't harm your lawn or plants lining your driveway, unlike chlorine bleach. Again, use the broom's bristles to scrub the area, then wait for 10-15 minutes.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
Interior Concrete Floors:
Clean with water. Use a mild detergent as needed. Such as Dove or Ivory dish soap. Do Not use Dawn, Simple Green, Ammonia or harsh cleaners as they will work to damage and even strip the wax.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Mix one cup of TSP (trisodium phosphate) in a gallon of hot water, then pour the solution over the blemish. Let it soak in for at least 30 minutes, and then scrub with a stiff nylon brush. Finally, blast the spot with your hose set to the highest pressure.
Follow these steps to clean your deck:
Fill the scoop with OxiClean™ Versatile Stain Remover to line 4. Mix with one gallon of the warm water until completely dissolved. 3. Apply using a brush and let stand for 5-30 minutes.
Wash the concrete > Mix a solution of ⅓ cup powdered laundry detergent, such as Tide, per gallon of hot water; the granules will act as a mild abrasive. Working in sections, pour some solution onto the floor and scrub with a stiff bristle brush. Wait about 10 minutes for dirt to loosen, then repeat.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
Bleach. Does a large area of your concrete need a good cleaning? Fill a bucket with warm water and about ¾ a cup of liquid bleach and start mopping. Let the bleach solution sit for a few minutes before using a bucket with clean water to mop up the bleach solution.
As moisture rises to the surface of the concrete, it carries with it the calcium salts from within the concrete. These react with CO2 at the surface, forming that white powdery dust. It can be worsened by exposure to moisture, such as rain. With no moisture movement, there is no efflorescence.
Mix bleach with water and then add dishwashing detergent to the mix and put it into a spray bottle. Spray the solution onto the cement patio, let it sit for a few minutes, then scrub the mix into the concrete with a stiff brush.