Solid laminate worktops are resistant to heat, however, we suggest that you do not place hot pans or dishes directly onto the surface. Instead, use a pan stand, trivet or hotrods.
Can You Put Hot Pans On Compact Laminate Worktops? The tough surface can resist some heat for short periods, but in general, it is not wise to place hot pots and pans directly on the worktop.
The main benefits of compact laminate worktops:
Wide range of designs. Easy to maintain. Heat resistant.
Hot cookware can leave permanent burn marks on many countertop surfaces including laminate. That's why we always recommend using a protective barrier such as a trivet or a hot plate as a final resting place for oven- or stovetop-fresh pots and pans.
It's common misperception that laminate can't tolerate any heat. Formica® Laminate can withstand heat up to 275 degrees for short periods of time. However, like all surface materials, a trivet should always be used on your countertops to avoid any possible heat mishaps.
Laminate is only moderately resistant to heat and can be damaged by hot pans and cooktop burners. Therefore, it is not suitable for the backsplash area directly behind a stove or cooktop.
For small burn marks, cut out the damage and apply a filler product, such as Seamfil or FormFill. For larger areas, cut out the damage and insert a Surface Saver cutting board or trivet. For countertops with straight or beveled edges, resurface over the existing laminate with a new piece of laminate.
Apply a layer of white toothpaste to the scorch mark and allow it to set for several minutes. Scrub the area lightly with either a scrub brush or toothbrush. Wipe the area clean with a soft cloth and water. If the stain remains, apply some Soft Scrub using the cloth and allow it to set for several minutes.
Once sealed, wood countertops are sanitary for chopping meat, and hot pots and pans can easily be placed on the surface because wood countertops are heat-resistant.
Laminate counters come with lots of features, like thinner edges, which reduces trimming and making them easier to fit. The compact laminate styles also have a solid core that removes the need for edging strips, saving both time and money.
Different ambient conditions in front and to the rear of the compact laminate elements can lead to warping. It is therefore essential that compact laminate wall panelling installations always make provision for adequate ventilation to the rear of the panels, which allows temperature and humidity to equalise.
Due to their solid, non-porous surface, solid laminate worktops are resistant to stains, mould, mildew and bacterial growth. Any spillages should be immediately wiped clean, however, if discolouration appears use a mild solution of detergent and water to clean the surface.
The truth is, laminate, Formica®, and Wilsonart® are basically the same; laminate is the material while Formica® and Wilsonart® are the brand names. Both brands come in a wide range of colors and patterns and are widely marketed for kitchen countertops, bathroom vanities, and bar counters.
Simply clean up streak-prone countertops with warm water and a drop of pH balanced dishwashing soap. Put a drop on a clean dish cloth, agitate under warm water, and wipe down countertops. Makes sense since those streaks are caused by the same greases that the dishwashing soap breaks up on cookware and dishes.
Quartz kitchen countertops are heat resistant and can protect against the spread of fire. However, extra caution should be taken as the countertops can get damaged from exposure to excess heat. Ensure you use heat protectors such as coasters, hot pads and trivets to protect the countertops from heat damage.
You'll need to buy a colorseam fill, which comes in a tube and is used for Formica. It is like a patching or caulking material. Just sand lightly, fill in with the matching color fill and sand it smooth. If this burn is in a high-wear area of the counter, this is not likely to last long, Michaels said.
When you've exposed the swollen part of the substrate, sand it flat and stabilize it (lock all those loose fibers together) with a thick coating of cyanoacrylate glue. Sand a little more, and check the flatness. Bear in mind that it's not a wedding cake or even a brand-new countertop; it doesn't have to be perfect.
The most heat resistant countertops include those made of granite, concrete and metals such as stainless steel and copper.
You can cover most laminate backsplashes with tile if you sand the laminate and install a layer of cement-based tile backer board first. Cut the backer board to fit the front and top of the backsplash with a utility knife, and sand the laminate to roughen it.
Laminate, made of thin sheets of heat-fused paper topped with melamine plastic, gained widespread popularity after World War II, popping up everywhere: in kitchens, bathrooms, restaurants, and high-end furniture.
The materials and process used manufacturing countertop laminate limit its ability to take the heat, so laminate countertops are only mildly heat resistant (up to about 150 degrees F/66C).
Laminate Counters Are Highly Heat resistant
You may be surprised to learn that modern plastic laminate countertops can withstand high temperatures; so much so that Consumer Reports gave both them and granite the same rating of 'Excellent' when they tested them.
Compact Laminate worktops are a great choice for the budget conscious. they have the benefits of being readily available from most DIY stores and are available in a multitude of style options. Resistant to marks and stains.