Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
For lingering stains, rewet the surface and sprinkle it lightly with Oxiclean. (Or you can make your own oxygen bleach.) This won't harm your lawn or plants lining your driveway, unlike chlorine bleach. Again, use the broom's bristles to scrub the area, then wait for 10-15 minutes.
Follow these steps to clean your deck:
Fill the scoop with OxiClean™ Versatile Stain Remover to line 4. Mix with one gallon of the warm water until completely dissolved. 3. Apply using a brush and let stand for 5-30 minutes.
Wet mop concrete using a pH-neutral cleaner and water. Rinse with water and allow to dry. You can also use liquid laundry detergent and water to remove stains, then scrub the area with a stiff nylon brush.
1. Best Overall Concrete Cleaner—ZEP Purple Pressure Wash. Zep concrete cleaner has several great products, and the ZEP Purple Pressure Wash outdoor cleaner is no exception. This alkaline cleaner is low foaming and easy to rinse from the concrete surface.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
probably at least a cup of the Oxy Clean and Biz, ½ - ¾ cup of Cascade and ⅓ cup of Dawn. if you are using a larger container, use more soap. then, mix it all up.
OxiClean™ is a Versatile Stain Remover in a powder form that is activated when added to water (warm or hot water work best). Oxygen is released and targets the stains, rather than the fabric, removing many tough stains on water-washable clothing, carpet, upholstery, and hard surfaces both inside and outside the home.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Vinegar Solution
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Don't use it on jewelry, wicker, or other non-suggested materials and surfaces. OxiClean should not be used to clean the following materials: jewelry, latex paints, woven baskets, unpainted wicker, jute, teak, or finished wood.
OxiClean™ Versatile Stain Remover should not be mixed with Chlorine bleach or household chemicals other than in the wash with your regular laundry detergent.
Use water and ammonia or methylene chloride to remove black stains from concrete. Black stains on concrete consist of layers of dirt and oil, chemicals, ink or other substances. The combination of substances become darker as layers of dirt accumulate on top of the stain.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
Although it's possible to scatter OxiClean powder on wet concrete, then scrub with a stiff broom, it's better (and easier) to first mix the powder with water. Use 4 scoops of powder per 1 gallon of warm to hot water. Mop that onto the concrete, then wait five to 30 minutes.
Acid Staining
Acid stains are a reactive coloring process that penetrates into the porous concrete surface. This is probably the most permanent of all coloring options but is usually limited to eight colors.
Most stains on concrete floors can be removed quickly and easily, but a lot depends on how old the stain is and how porous the concrete surface is. Rust, oil, grease, paint or glue stains each have a recommended stain removal technique.